Does my Stillen exhaust stick out to much?

wifedrivenZ · 07-24-2010, 02:08 AM

All,
I have looked at other people with stillen exhaust and I have not seen any that stick out as much as mine. Did my shop install it wrong? Thanks for your help in advance. If you have a Stillen exhaust please post pictures.
Exhaust Back view.jpg
Exhaust close up.jpg

Trips · 07-24-2010, 02:22 AM

They stick out a little, You may want to PM Kyle at Stillen to answer your questions, Don't be like some who have modified the tip. I think it just needs a little adjusting.

Ztoon · 07-24-2010, 02:23 AM

I thought the same with mine when first installed, although yours seem to be sitting lower and, yeah, they do look kinda out there.

Jesse_Hunter · 07-24-2010, 04:58 AM

mine barely stick out at all. Just enough to make out "stillen"

RomRox · 07-24-2010, 10:45 AM

to the OP, mine sticks out like (maybe half a cm less than that) that when i've been driving around for a bit. When sitting in the garage overnight, all you can see is "Stillen" at the top of the tips.

I actually dont mind the tips the way they are, its just one side sticks out further 0.5cm's (not sure what that is in inches) than the other exhaust tip.

I wonder if this is an easy adjustment on the sliders/hangers that the exhaust sits on or is this something we have to take back to the shop. I had a bad experience at the shop so really don't want to take it back there.

wifedrivenZ · 08-05-2010, 11:30 AM

Ok guys I just got back from Iraq last night and I had my first eyes on look at the exhaust. I took the car to the dealership and they put it on a lift for me. Whent I check it the exhause it was not hanging from all the brackets. The 2 back ones were off. I moved the rubber bracket back on the the hanger and there was no metal showing on the other side of the rubber pice. I think that not only does the tips stick out to much but it is not sitting correct. I told the guy that it may be not connected the right way and I think he took offence. He said that he would look into it. Can anyone take a picture of a Stillen exhaust installed with a focus on the back hangers.
Thanks

07-24-2010, 02:08 AM	#1 (permalink)
wifedrivenZ Base Member Join Date: May 2010 Location: Victorville CA Posts: 69 Drives: 370Z 40th Rep Power: 15	Does my Stillen exhaust stick out to much? All, I have looked at other people with stillen exhaust and I have not seen any that stick out as much as mine. Did my shop install it wrong? Thanks for your help in advance. If you have a Stillen exhaust please post pictures. Exhaust Back view.jpg Exhaust close up.jpg

07-24-2010, 02:22 AM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	They stick out a little, You may want to PM Kyle at Stillen to answer your questions, Don't be like some who have modified the tip. I think it just needs a little adjusting. __________________

07-24-2010, 04:58 AM	#4 (permalink)
Jesse_Hunter Track Member Join Date: Mar 2010 Location: Denton,TX Age: 37 Posts: 738 Drives: 07' Sky Redline Rep Power: 365	mine barely stick out at all. Just enough to make out "stillen" __________________ Check out my digital art/photo art!

08-05-2010, 11:30 AM	#6 (permalink)
wifedrivenZ Base Member Join Date: May 2010 Location: Victorville CA Posts: 69 Drives: 370Z 40th Rep Power: 15	Ok guys I just got back from Iraq last night and I had my first eyes on look at the exhaust. I took the car to the dealership and they put it on a lift for me. Whent I check it the exhause it was not hanging from all the brackets. The 2 back ones were off. I moved the rubber bracket back on the the hanger and there was no metal showing on the other side of the rubber pice. I think that not only does the tips stick out to much but it is not sitting correct. I told the guy that it may be not connected the right way and I think he took offence. He said that he would look into it. Can anyone take a picture of a Stillen exhaust installed with a focus on the back hangers. Thanks __________________ Stillen Exhaust, Stillen Supercharger, Stillen Oil cooler, Stillen Headers, Test pipes, 928 Impeller, 9 lbs pulley running 12lbs of boost, Custom tune from National Speed. 415WHP 345TQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 05:20 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 02:21 AM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 10:01 PM

07-24-2010, 10:45 AM	#5 (permalink)
RomRox Base Member Join Date: May 2010 Location: Edmonton, Alberta Posts: 110 Drives: 10 Nissan 370Z MB M6 Rep Power: 14	to the OP, mine sticks out like (maybe half a cm less than that) that when i've been driving around for a bit. When sitting in the garage overnight, all you can see is "Stillen" at the top of the tips. I actually dont mind the tips the way they are, its just one side sticks out further 0.5cm's (not sure what that is in inches) than the other exhaust tip. I wonder if this is an easy adjustment on the sliders/hangers that the exhaust sits on or is this something we have to take back to the shop. I had a bad experience at the shop so really don't want to take it back there.