Where is everyone starting??

FuszNissan · 10-04-2009, 07:45 AM

I would go with Stillen Gen 3 CAI and F.I. HFC's. That would put you close to the 2k mark with installation. Unless you are going to do it yourself, you would be closer to 1k. Plus the gains would be very noticeable in the higher rpm's. I think those are the best bang for the buck.

dcrew1x · 10-04-2009, 08:30 AM

Stillen Gen 3's!

Mike · 10-04-2009, 09:40 AM

modshack oil cooler (285)
Stillen Gen 3 (550)
Invidia Gemini Exhaust (930)
Test pipes or cats (3-500)

Right around 2000 and its a nice package.

boomboom · 10-04-2009, 05:41 PM

Quote:

Originally Posted by Mike

modshack oil cooler (285)
Stillen Gen 3 (550)
Invidia Gemini Exhaust (930)
Test pipes or cats (3-500)

Right around 2000 and its a nice package.

This does seem like a good priced set-up..i need the oil cooler and then thinking about prolly the headers and cat-back..

Knives · 10-04-2009, 05:58 PM

Best "bang for your buck" would def be the Gen3 intake and hi-flow cats.

I've got the Gen3 , stillen U/D pulley, stillen grounding kit, stillen headers and waiting on my FI catback.

Keeping the stock cats for noise purposes.

10-04-2009, 07:45 AM	#1 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 544	I would go with Stillen Gen 3 CAI and F.I. HFC's. That would put you close to the 2k mark with installation. Unless you are going to do it yourself, you would be closer to 1k. Plus the gains would be very noticeable in the higher rpm's. I think those are the best bang for the buck. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

10-04-2009, 08:30 AM	#2 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 370	Stillen Gen 3's! __________________ 2009 PG 6MT Sports Stillen Gen3 CAI \| Stillen CBE \| AMS Short Shifter \| Nismo Brace Kit

10-04-2009, 09:40 AM	#3 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2187	modshack oil cooler (285) Stillen Gen 3 (550) Invidia Gemini Exhaust (930) Test pipes or cats (3-500) Right around 2000 and its a nice package. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Starting up a new car club in Santa Barbara, CA.	patmsb1	Southern California Region	2	10-16-2009 11:54 PM
Rubber isolators starting to come off?	supraman626	Nissan 370Z General Discussions	13	08-19-2009 05:12 AM
Omg...at last. Starting to lose sleep.	tbonesteak	Nissan 370Z General Discussions	20	07-20-2009 10:25 PM
Need Some Help Starting Out	AlmtyBob	Audio & Video	10	05-05-2009 07:56 PM
Starting negotiations!!!	kustomZ	Nissan 370Z Pricing / Ordering Discussions	10	03-11-2009 11:25 AM

10-04-2009, 05:58 PM	#5 (permalink)
Knives Enthusiast Member Join Date: May 2009 Location: New York Posts: 293 Drives: 2009 370z 6MT Rep Power: 18	Best "bang for your buck" would def be the Gen3 intake and hi-flow cats. I've got the Gen3 , stillen U/D pulley, stillen grounding kit, stillen headers and waiting on my FI catback. Keeping the stock cats for noise purposes.