Twin air ducts

murking · 10-03-2014, 04:16 PM

If those ducts are anything similar to the ones everyone had on their 350s, they do nothing worth while for IATs or HP gains and are essentially a cosmetic mod.

Jordo! · 10-03-2014, 04:31 PM

Quote:

Originally Posted by dmhenderson

Y'know now that I look at the first picture closer, it looks an awful lot like someone took my RC ducts and slapped them onto the top of the bumper instead of connecting them to the rotors.

Thinking those Varis ducts may be the way to go. Just wish they were a little more cosmetic.

Edit: Also echoing what someone said earlier, I'd love to see the hardware behind the ducts. If they are just bumper holes I'm not going to be super stoked.

For reference, here's what they are supposed to look like:

Yeah, I'm really curious to see if they actually mate up to the OEM inner bumper duct opening. The OEM boxes sort of slide and snap down securely to that opening for air tight seal, complete with some insulation foam.

If they don't seal to that duct opening -- and they very well may not -- it's probably not really worth it, and may even create pressure drops.

It would also be interesting to see a comparison of IAT's with and without the ducts, whether or not they mate perfectly to the inner ducting.

synolimit · 10-03-2014, 05:33 PM

Quote:

Originally Posted by murking

If those ducts are anything similar to the ones everyone had on their 350s, they do nothing worth while for IATs or HP gains and are essentially a cosmetic mod.

I'd prob agree but you'd have to do one test to prove you right or wrong. These aren't going to show up on a dyno but could in the real world. A dyno can't generate the air speed but a rolling road can. You'd have to do a 50-100 and time it. Install these and do it again. I bet you do see a drop in time which would equal a HP increase from the ram air effect.

synolimit · 10-03-2014, 05:41 PM

They make 2 of these as seen in the pics with the white car and the one members grey car. I personally like ones on the members grey car which are the rectangle ones origanally made for a 350z. These are just openings that stick back about 4 inches. How you place them, seal them, route them etc is all up to you. It's no difference than a brake duct cooling insert like shown on the member black car. You either hook up hose and route or don't.

You also don't cut the styrofoam. These mount higher where the stillen filters sit. The bumper beam is below.

Elmo370z · 10-03-2014, 10:24 PM

Motorsport! EVO-R Carbon Fiber Twin Air Duct Kit, 09-14 370Z - The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts. That's where I purchased these ducts

Elmo370z · 10-03-2014, 10:28 PM

Future plans LTH's, exhaust, upRev, Maybe jun cams once someone taps into that unchartered territory, rods pistons, and upgrade oil pump etc I want to rev 8,500-9000 rpms. Long term really long term plans

Elmo370z · 10-03-2014, 10:29 PM

Figure if people are getting 18whp with just stillen g3's with the bumper off, these air ducts have to duplicate that flow of air somewhat.

ANMVQ · 10-06-2014, 11:26 AM

I just did these on Friday night, Took CF Saleen brake ducts and mount to the bumper ducts.

juld0zer · 10-07-2014, 09:48 AM

it's not a mod to gain power, but rather a mod to gain driveability and consistency - or at least prolong the pleasure.
the less time it takes for your IAT to drop, the sooner your timing advances again.
i made a ghetto pair of air scoops for my Stillen G3 intakes. they are so big you can barely see the radiator thru the front grille. hard to tell if there is any gain from ram air but IATs stay pretty steady and cool fairly quickly from a standstill. throttle response remains fairly consistent even in heavy traffic. so it's a win on that front.

only problem is that coolant temps are slightly higher due to reduced airflow. driven thru heavy rain and i havent had any issues. filters were a bit soggy but no ill effects could be noticed

ANMVQ · 10-07-2014, 03:25 PM

I wouldn't say there's no performance gain yet. These run the same path as the Stillen Gen 3's. I have a dyno the 25th to see if these made anything.

Elmo370z · 10-09-2014, 11:13 PM

Well just got done a test drive, I don't if it's just me or the weather, but the car seem to pull a bit harder and throttle response is a little better. As far as the placement they line up directly in-front of the stock air ducts.

synolimit · 10-10-2014, 12:33 AM

My friends...

Z34yaj · 02-14-2019, 08:34 PM

For future reference. Could be the same for 370z: https://my350z.com/forum/body-interi...-air-duct.html

Quicksilvers · 02-14-2019, 10:25 PM

These twin air ducts are a excellent idea as your engine will benefit from breathing in more air flow. Only thing you will have to clean or replace your air filters more often and clean up your engine bay more often as well but this twin air duct mod is worth it I believe.

Elmo370z · 02-15-2019, 02:24 AM

Talk about waking this up from the dead, crazy how my plans have changed

10-03-2014, 05:41 PM	#19 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	They make 2 of these as seen in the pics with the white car and the one members grey car. I personally like ones on the members grey car which are the rectangle ones origanally made for a 350z. These are just openings that stick back about 4 inches. How you place them, seal them, route them etc is all up to you. It's no difference than a brake duct cooling insert like shown on the member black car. You either hook up hose and route or don't. You also don't cut the styrofoam. These mount higher where the stillen filters sit. The bumper beam is below. __________________ 13 370z- Last edited by synolimit; 10-03-2014 at 05:43 PM.

10-03-2014, 10:28 PM	#21 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Future plans LTH's, exhaust, upRev, Maybe jun cams once someone taps into that unchartered territory, rods pistons, and upgrade oil pump etc I want to rev 8,500-9000 rpms. Long term really long term plans beauz likes this.

10-07-2014, 03:25 PM	#25 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I wouldn't say there's no performance gain yet. These run the same path as the Stillen Gen 3's. I have a dyno the 25th to see if these made anything. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-10-2014, 12:33 AM	#27 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	My friends... Jordo!, Stright_Drop, Elmo370z and 2 others like this. __________________ 13 370z-

02-14-2019, 10:25 PM	#29 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25462	These twin air ducts are a excellent idea as your engine will benefit from breathing in more air flow. Only thing you will have to clean or replace your air filters more often and clean up your engine bay more often as well but this twin air duct mod is worth it I believe. Elmo370z likes this.

10-03-2014, 04:16 PM	#16 (permalink)
murking Base Member Join Date: Feb 2014 Location: Sarasota/Viera Posts: 1 Drives: 06 STI Rep Power: 11	If those ducts are anything similar to the ones everyone had on their 350s, they do nothing worth while for IATs or HP gains and are essentially a cosmetic mod.

10-03-2014, 10:24 PM	#20 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Motorsport! EVO-R Carbon Fiber Twin Air Duct Kit, 09-14 370Z - The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts. That's where I purchased these ducts

10-03-2014, 10:29 PM	#22 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Figure if people are getting 18whp with just stillen g3's with the bumper off, these air ducts have to duplicate that flow of air somewhat.

10-07-2014, 09:48 AM	#24 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 138	it's not a mod to gain power, but rather a mod to gain driveability and consistency - or at least prolong the pleasure. the less time it takes for your IAT to drop, the sooner your timing advances again. i made a ghetto pair of air scoops for my Stillen G3 intakes. they are so big you can barely see the radiator thru the front grille. hard to tell if there is any gain from ram air but IATs stay pretty steady and cool fairly quickly from a standstill. throttle response remains fairly consistent even in heavy traffic. so it's a win on that front. only problem is that coolant temps are slightly higher due to reduced airflow. driven thru heavy rain and i havent had any issues. filters were a bit soggy but no ill effects could be noticed

10-09-2014, 11:13 PM	#26 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Well just got done a test drive, I don't if it's just me or the weather, but the car seem to pull a bit harder and throttle response is a little better. As far as the placement they line up directly in-front of the stock air ducts.

02-14-2019, 08:34 PM	#28 (permalink)
Z34yaj Base Member Join Date: Mar 2017 Location: Minnesota Posts: 18 Drives: 15 Nissan 370Z M6 Rep Power: 8	For future reference. Could be the same for 370z: https://my350z.com/forum/body-interi...-air-duct.html

02-15-2019, 02:24 AM	#30 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Talk about waking this up from the dead, crazy how my plans have changed beauz likes this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which stage of twin-turbo/twin-supercharger kit should I get?	Nuc370z	Forced Induction	13	12-30-2015 07:15 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
air ducts???	kdo2milger	ConceptZperformance	8	03-27-2012 11:53 PM
Ducts?	bigrob126	Nissan 370Z General Discussions	5	02-07-2011 05:53 PM
intake ducts	black09Z	Wanted	4	09-17-2009 07:37 AM