Another oil filter for Stillen oil cooler sandwich plate thread

DEpointfive0 · 08-22-2014, 12:22 AM

Quote:

Originally Posted by aszyd

FYI. The Bosch D3312 is too long to be installed on a 2012+ with the OEM oil cooler.

Dirty, I don't have that issue... Take the OEM cooler off

critical · 08-22-2014, 12:21 AM

i use an xg3950

aszyd · 08-22-2014, 12:34 PM

I did look into that option, however, to successfully remove it, I would have needed the filter adapter from a '09 - '11. The one on cars with the oil cooler is longer and the filter would not have mated to the pan.

Such is life. I also broke the upper pan at the oil pressure sensor, so my car is out of commission until the new pan arrives.

aszyd · 08-30-2014, 08:49 PM

Picked up this one from my local Advanced Auto. Purolator Pureone PL10193. It was a tight fit, but it fit none the less. I compared it to the suggested Fram model and they looked the same. Funny thing is that the filters are larger than the plate, but thanks to the enlarged o-ring, it seals just fine. Before I purchased it, I was like, "no way in hell!"

Also, I'm happy to be back with a Pureone. Sucks that Walmart does not carry any of these filters. I pick up the Mobil 1 from there, so it would be convenient to also be able to buy the filter as well.

1slow370 · 09-03-2014, 10:37 PM

but that was like 3 yrs i ago unless you were unlucky enough to buy one you probably forgot, I know I did cuz my cooler used to use oe filters.

abm89 · 09-24-2015, 11:34 AM

I haven't had any issues with the Fram filters. Just my 2 cents:

carlitos_370z · 09-24-2015, 12:06 PM

Awesome my friend! thanks for share that to us

BTW you change your oil every 3k miles right? i think i see that on the table that you post... just to confirm

abm89 · 09-24-2015, 12:17 PM

5K for daily use. Sooner if i use it on the track.

carlitos_370z · 09-24-2015, 12:41 PM

Quote:

Originally Posted by abm89

5K for daily use. Sooner if i use it on the track.

Just like me bro!!!! Thanks a lot for let me know

BTW and you use the 5w30 oil?

that was my last question

abm89 · 09-24-2015, 05:52 PM

Quote:

Originally Posted by carlitos_370z

Just like me bro!!!! Thanks a lot for let me know

BTW and you use the 5w30 oil?

that was my last question

Redline, yes.

carlitos_370z · 09-25-2015, 07:16 AM

Quote:

Originally Posted by abm89

Redline, yes.

Thanks!

Zoren 370 · 09-25-2015, 10:08 AM

Carlito my friend yeah Fram is good. I just change the oil filter around 3k miles and change the oil at 4.5k

DallasCRX · 03-04-2016, 07:20 PM

FYI, I've been using the Amsoil EAO21 filter for my Stillen oil cooler, it appears this part number has been discontinued from Amsoil...

d_runk96 · 05-14-2016, 08:17 PM

Wix 51381, NAPA 21381 or 1381

VQ37 · 07-12-2016, 11:47 AM

I just sold me Z but Bosch D3312 fits perfect!

08-22-2014, 12:21 AM	#2 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 17	i use an xg3950 __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

08-22-2014, 12:34 PM	#3 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 23	I did look into that option, however, to successfully remove it, I would have needed the filter adapter from a '09 - '11. The one on cars with the oil cooler is longer and the filter would not have mated to the pan. Such is life. I also broke the upper pan at the oil pressure sensor, so my car is out of commission until the new pan arrives. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

08-30-2014, 08:49 PM	#4 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 23	Picked up this one from my local Advanced Auto. Purolator Pureone PL10193. It was a tight fit, but it fit none the less. I compared it to the suggested Fram model and they looked the same. Funny thing is that the filters are larger than the plate, but thanks to the enlarged o-ring, it seals just fine. Before I purchased it, I was like, "no way in hell!" Also, I'm happy to be back with a Pureone. Sucks that Walmart does not carry any of these filters. I pick up the Mobil 1 from there, so it would be convenient to also be able to buy the filter as well. DEpointfive0 likes this. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

09-03-2014, 10:37 PM	#5 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7252	but that was like 3 yrs i ago unless you were unlucky enough to buy one you probably forgot, I know I did cuz my cooler used to use oe filters. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

09-24-2015, 11:34 AM	#6 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,390 Drives: 11 370Z, 2x Kawasaki Rep Power: 64765	I haven't had any issues with the Fram filters. Just my 2 cents: JARblue and carlitos_370z like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

09-24-2015, 12:06 PM	#7 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7587	Awesome my friend! thanks for share that to us BTW you change your oil every 3k miles right? i think i see that on the table that you post... just to confirm

09-24-2015, 12:17 PM	#8 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,390 Drives: 11 370Z, 2x Kawasaki Rep Power: 64765	5K for daily use. Sooner if i use it on the track. carlitos_370z likes this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

09-25-2015, 10:08 AM	#12 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913655	Carlito my friend yeah Fram is good. I just change the oil filter around 3k miles and change the oil at 4.5k carlitos_370z likes this.

03-04-2016, 07:20 PM	#13 (permalink)
DallasCRX Base Member Join Date: Nov 2014 Location: Barrie Posts: 16 Drives: 1986 Honda CRX Rep Power: 12	FYI, I've been using the Amsoil EAO21 filter for my Stillen oil cooler, it appears this part number has been discontinued from Amsoil...

05-14-2016, 08:17 PM	#14 (permalink)
d_runk96 Base Member Join Date: May 2015 Location: louisiana Posts: 1 Drives: 12 Nissan 370z CG M6 Rep Power: 11	Wix 51381, NAPA 21381 or 1381 carlitos_370z likes this.

07-12-2016, 11:47 AM	#15 (permalink)
VQ37 Base Member Join Date: Nov 2013 Location: SOCAL Posts: 61 Drives: 2011 370z Rep Power: 13	I just sold me Z but Bosch D3312 fits perfect! carlitos_370z likes this. __________________ ZZZ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What oil filter to use with Oil Cooler sandwich adapter?	atx370z	Engine & Drivetrain	11	03-26-2014 10:36 AM
Oil Filter Sandwich Plate	Live4Driving	Engine & Drivetrain	20	03-05-2014 12:14 PM
Which oil filter ensures a proper seal with stillen oil cooler sandwich plate?	Sami	Engine & Drivetrain	8	07-09-2013 08:00 AM
[FOR SALE] Oil cooler & Sandwich plate	bigrob126	Parts for sale (Private Classifieds)	4	03-07-2012 02:35 AM
Oil Cooler Thermostatic Sandwich Plate Conversion Kit?	Nismo221	Engine & Drivetrain	5	09-07-2010 12:44 PM