Another oil filter for Stillen oil cooler sandwich plate thread

Super Werty · 09-03-2014, 08:32 PM

Quote:

Originally Posted by DEpointfive0

... You didn't read the thread title at all did you?

I did, and just now I re-read it. What did I miss? He wants to know what filter will fit with an oil cooler sandwich plate....right? no?

DEpointfive0 · 09-03-2014, 08:41 PM

Quote:

Originally Posted by Super Werty

I did, and just now I re-read it. What did I miss? He wants to know what filter will fit with an oil cooler sandwich plate....right? no?

With a STILLEN sandwich plate. Not all sandwich plates are the same. I assume FIs is meant to use the stock filter. Stillen's is not designed to use the stock filter

aszyd · 09-03-2014, 09:08 PM

Quote:

Originally Posted by DEpointfive0

With a STILLEN sandwich plate. Not all sandwich plates are the same. I assume FIs is meant to use the stock filter. Stillen's is not designed to use the stock filter

I think that is a mistake on Stillen's part. There are a few negatives to requiring a different filter than stock. One definitely has to be willing to do their own oil changes with this kit, or be prepared for hassle and/or mistakes.

Super Werty · 09-03-2014, 10:03 PM

Quote:

Originally Posted by DEpointfive0

With a STILLEN sandwich plate. Not all sandwich plates are the same. I assume FIs is meant to use the stock filter. Stillen's is not designed to use the stock filter

ah I see, I was not aware the stillen plate didnt use stock filters sizes.

DEpointfive0 · 09-03-2014, 10:24 PM

Quote:

Originally Posted by Super Werty

ah I see, I was not aware the stillen plate didnt use stock filters sizes.

My bad if I came off sounding like an asshole.
I thought that was common forum knowledge that the Stillen plate uses a different filter

1slow370 · 09-03-2014, 10:37 PM

but that was like 3 yrs i ago unless you were unlucky enough to buy one you probably forgot, I know I did cuz my cooler used to use oe filters.

Zoren 370 · 09-03-2014, 10:47 PM

Quote:

Originally Posted by DEpointfive0

My bad if I came off sounding like an asshole.
I thought that was common forum knowledge that the Stillen plate uses a different filter

Hey Andrew its ok its a common forum knowledge that you can be an AH
Once provoked specially when lowballed!
Your always forgiven.

Zoren 370 · 09-03-2014, 10:53 PM

Op I'm glad i have found this thread as Im not comfortable using the $3 fram oil filter as suggested by Stillen.

Will try the K&N and Mobil as suggested.
The last time I tried the K&N oil spilled all over as i did not get a good seal.
Could not remember which part number was it hopefully not the same as you suggested,

carlitos_370z · 09-23-2015, 10:36 AM

Quote:

Originally Posted by Zoren 370

Op I'm glad i have found this thread as Im not comfortable using the $3 fram oil filter as suggested by Stillen.

Will try the K&N and Mobil as suggested.
The last time I tried the K&N oil spilled all over as i did not get a good seal.
Could not remember which part number was it hopefully not the same as you suggested,

Zoren bro!!! i want to ask... you still not remember what part number of K&N oil filter do you use on your Z with the stillen sandwich plate??

Is the only one except for the Fram that comes with the Stillen Oil Cooler kit i can find in the shops around my area

Zoren 370 · 09-23-2015, 07:32 PM

Quote:

Originally Posted by carlitos_370z

Zoren bro!!! i want to ask... you still not remember what part number of K&N oil filter do you use on your Z with the stillen sandwich plate??

Is the only one except for the Fram that comes with the Stillen Oil Cooler kit i can find in the shops around my area

Sorry bro I could not remember but autozone made a search match for the Fram oil filter used by stillen then is the one came out in the computer K&N brand.
When I get the chance to go by autozone I'll get the part # but it did not give a good seal spilled about a quart of oil.

carlitos_370z · 09-24-2015, 06:55 AM

Quote:

Originally Posted by Zoren 370

Sorry bro I could not remember but autozone made a search match for the Fram oil filter used by stillen then is the one came out in the computer K&N brand.
When I get the chance to go by autozone I'll get the part # but it did not give a good seal spilled about a quart of oil.

Daaamn that not sounds good :/ well i read a few threads and everyone mention the damn K&N Part #HP1008 but no one wirte back about the experience with that oil filter... Im about to do my first oil change after install the Stillen oil cooler and i dont want to use the Fram oil filter... if I dont find anything more well have to use the damn Fram filter

abm89 · 09-24-2015, 11:34 AM

I haven't had any issues with the Fram filters. Just my 2 cents:

carlitos_370z · 09-24-2015, 12:06 PM

Awesome my friend! thanks for share that to us

BTW you change your oil every 3k miles right? i think i see that on the table that you post... just to confirm

abm89 · 09-24-2015, 12:17 PM

5K for daily use. Sooner if i use it on the track.

carlitos_370z · 09-24-2015, 12:41 PM

Quote:

Originally Posted by abm89

5K for daily use. Sooner if i use it on the track.

Just like me bro!!!! Thanks a lot for let me know

BTW and you use the 5w30 oil?

that was my last question

09-03-2014, 10:37 PM	#21 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	but that was like 3 yrs i ago unless you were unlucky enough to buy one you probably forgot, I know I did cuz my cooler used to use oe filters. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

09-03-2014, 10:53 PM	#23 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	Op I'm glad i have found this thread as Im not comfortable using the $3 fram oil filter as suggested by Stillen. Will try the K&N and Mobil as suggested. The last time I tried the K&N oil spilled all over as i did not get a good seal. Could not remember which part number was it hopefully not the same as you suggested, carlitos_370z likes this.

09-24-2015, 11:34 AM	#27 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,390 Drives: 11 370Z, 2x Kawasaki Rep Power: 64764	I haven't had any issues with the Fram filters. Just my 2 cents: JARblue and carlitos_370z like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

09-24-2015, 12:17 PM	#29 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,390 Drives: 11 370Z, 2x Kawasaki Rep Power: 64764	5K for daily use. Sooner if i use it on the track. carlitos_370z likes this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What oil filter to use with Oil Cooler sandwich adapter?	atx370z	Engine & Drivetrain	11	03-26-2014 10:36 AM
Oil Filter Sandwich Plate	Live4Driving	Engine & Drivetrain	20	03-05-2014 12:14 PM
Which oil filter ensures a proper seal with stillen oil cooler sandwich plate?	Sami	Engine & Drivetrain	8	07-09-2013 08:00 AM
[FOR SALE] Oil cooler & Sandwich plate	bigrob126	Parts for sale (Private Classifieds)	4	03-07-2012 02:35 AM
Oil Cooler Thermostatic Sandwich Plate Conversion Kit?	Nismo221	Engine & Drivetrain	5	09-07-2010 12:44 PM

09-24-2015, 12:06 PM	#28 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7587	Awesome my friend! thanks for share that to us BTW you change your oil every 3k miles right? i think i see that on the table that you post... just to confirm