Lets talk oil coolers

bleunetizen · 07-20-2014, 06:08 AM

I'm using Stillen kit, 25row setrab core, the highest ive seen at the track yesterday was 110degC (230degF) with ambient temp of 10degC (50degF), that was after about 12min of hot laps

Corsairprime · 07-21-2014, 07:18 PM

From what I read, almost everyone hates the Mishimoto kit. I am sorry people feel that way. My temps have been stable. Today for instance drove 40 minutes in 101° heat at 70-80 mph. Oil temps 185° low temp, to 215° at a high temp. No leaks and fits like a glove. I opted for the thermostatic sandwich plate too. The kit is very well thought out. Use the setrab radiator mount and you get to keep the cross brace strut on the Nismo. But what does that matter. You must go see for yourself. Oil temp control is key in the 370Z. Without it, you will not be enjoying track days.

ANMVQ · 07-22-2014, 10:51 AM

ordered the Z1 19 row, Wrapped hoses and thermostatic plate . Will be install this over the weekend. Will be delivered tomorrow. I'm going to play with placement a little also and see if I can get it right in the opening in my front bumper. 09's only have that small square in the center of the bumper

ANMVQ · 07-22-2014, 10:53 AM

Quote:

Originally Posted by Yutnaka

do you plan on getting Uprev? If so I would go with a smaller core since they can modify fan tables. I dont have an oil cooler but it cools down relatively fast. With that said, I am getting a 25 row oil cooler from Z1.

I do have UPREV and the first thing I had them do was change the fans settings, I knew about this from before , 2nd time around with UPREV

ANMVQ · 07-23-2014, 12:47 PM

Just got confirm it's at my house

atomic aces · 07-23-2014, 01:51 PM

I'm trying to make it through this Summer with the stock cooler, but I'll be purchasing Fast Intentions 34 row by Spring 2015 at the latest.

ART_Auto · 07-23-2014, 02:35 PM

I have gone ahead an upgraded our oil cooling:-

2 x Setrab 25 Row x 235mm with An10 fittings.

Hopefully this will keep her cool.

ANMVQ · 07-28-2014, 08:30 AM

Tired Saturday took a lot apart look at things and had to put it back together, Wife had plans at 2pm and is was 930am, No was was I getting it done by then

. I do everything on the ground and was going to rain Sunday. Next weekend I guess

ANMVQ · 08-04-2014, 08:01 AM

Still sitting in my shed

No time!! Just may pay for it.

G37Sam · 08-04-2014, 08:24 AM

While we're talking oil coolers, are there any kits that use OEM oil filters?

Read T · 08-04-2014, 09:19 AM

Quote:

Originally Posted by G37Sam

While we're talking oil coolers, are there any kits that use OEM oil filters?

Z1

1slow370 · 08-04-2014, 11:32 AM

Quote:

Originally Posted by G37Sam

While we're talking oil coolers, are there any kits that use OEM oil filters?

As in the oil filter used after you install the sandwhich plate? on regular cooler kits they all use the oem filter.

G37Sam · 08-04-2014, 04:27 PM

Yeah.. we couldn't get the OEM Oil Filter to mate on the Stillen Adapter for instance and had to have all the filters shipped from the US. Will the Z1 adapter accept OEM filters?

1slow370 · 08-04-2014, 07:48 PM

Yes as well as gtm, nismo, mocal 20mm, I guess the cheap sandwhich plate stillen uses has a different thread.

G37Sam · 08-05-2014, 03:43 AM

Thanks for the info sir!

07-21-2014, 07:18 PM	#17 (permalink)
Corsairprime Base Member Join Date: May 2014 Location: Frisco, TX Posts: 215 Drives: 14 370Z Nismo GM 6MT Rep Power: 3544	Just installed the Mishimoto kit. From what I read, almost everyone hates the Mishimoto kit. I am sorry people feel that way. My temps have been stable. Today for instance drove 40 minutes in 101° heat at 70-80 mph. Oil temps 185° low temp, to 215° at a high temp. No leaks and fits like a glove. I opted for the thermostatic sandwich plate too. The kit is very well thought out. Use the setrab radiator mount and you get to keep the cross brace strut on the Nismo. But what does that matter. You must go see for yourself. Oil temp control is key in the 370Z. Without it, you will not be enjoying track days. __________________ Corsairprime 2014 Nismo #462, GunMetal Grey, GT-R Start Button, AAM S-Line/R-Line intake and S-Line exhaust, Berk HFCs, Osiris Tuned at JoTech

07-28-2014, 08:30 AM	#23 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Tired Saturday took a lot apart look at things and had to put it back together, Wife had plans at 2pm and is was 930am, No was was I getting it done by then . I do everything on the ground and was going to rain Sunday. Next weekend I guess __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-04-2014, 08:01 AM	#24 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Still sitting in my shed No time!! Just may pay for it. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-04-2014, 08:24 AM	#25 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	While we're talking oil coolers, are there any kits that use OEM oil filters? __________________ '14 Viper GTS '08 RB'd G37S - Sold

08-04-2014, 04:27 PM	#28 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Yeah.. we couldn't get the OEM Oil Filter to mate on the Stillen Adapter for instance and had to have all the filters shipped from the US. Will the Z1 adapter accept OEM filters? __________________ '14 Viper GTS '08 RB'd G37S - Sold

07-20-2014, 06:08 AM	#16 (permalink)
bleunetizen Base Member Join Date: Jan 2014 Location: NZ Posts: 138 Drives: BMW M6, 530i, 370z Rep Power: 11	I'm using Stillen kit, 25row setrab core, the highest ive seen at the track yesterday was 110degC (230degF) with ambient temp of 10degC (50degF), that was after about 12min of hot laps

07-23-2014, 01:51 PM	#21 (permalink)
atomic aces Base Member Join Date: Dec 2013 Location: GA Posts: 54 Drives: '09 335i E92 6MT Rep Power: 11	I'm trying to make it through this Summer with the stock cooler, but I'll be purchasing Fast Intentions 34 row by Spring 2015 at the latest.

07-23-2014, 02:35 PM	#22 (permalink)
ART_Auto Base Member Join Date: Mar 2014 Location: Glasgow, UK Posts: 43 Drives: 370z Rep Power: 11	I have gone ahead an upgraded our oil cooling:- 2 x Setrab 25 Row x 235mm with An10 fittings. Hopefully this will keep her cool.

08-04-2014, 07:48 PM	#29 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	Yes as well as gtm, nismo, mocal 20mm, I guess the cheap sandwhich plate stillen uses has a different thread. G37Sam and G37sHKS like this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-05-2014, 03:43 AM	#30 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Thanks for the info sir! __________________ '14 Viper GTS '08 RB'd G37S - Sold

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lets talk about lightweight rotors	DEpointfive0	Brakes & Suspension	8	08-30-2013 06:11 PM
Lets Talk Rotors: Cryo-treating	MightyBobo	Track / Autocross / Drifting / Dragstrip	28	08-15-2013 12:26 AM
Hey Louisiana... lets talk meet!	TypeOne	Southern Region	191	09-11-2011 08:22 AM
Lets talk about subs for a Zenclosures box	Boosted Josh	Audio & Video	28	08-04-2010 07:17 PM