Very little clutch!

tommyguns · 06-04-2014, 05:46 AM

Got in the car this morning and the clutch pedal is engaging an inch from the bottom and the pedal has a ton of play at the top. It was fine all day yesterday. Any suggestions?

N0SL3N · 06-04-2014, 05:54 AM

Temporary - Replace fluid with RBF600

Permanent - Replace CSC, while you are at it replace the MC, flywheel and clutch

tommyguns · 06-04-2014, 06:22 AM

Quote:

Originally Posted by N0SL3N

Temporary - Replace fluid with RBF600

Permanent - Replace CSC, while you are at it replace the MC, flywheel and clutch

Thanks for the help! Looks like I'll be needing a new CSC. There wasn't an ounce of fluid in the reservoir. Put in some RBF600 and it seems to be back. So what CSC should I get as well as the clutch? I have the JWT flywheel and I do intend to make the jump to a SC in the next 6 weeks. Thanks again.

N0SL3N · 06-04-2014, 06:27 AM

Either the zspeed hd csc or the z1 external csc. The z1 product is newer and I believe takes a few extra steps to install so that it can be mounted externally, but it allows you to service without removing the tranny.

Can't go wrong with either. I have the zspeed one.

JARblue · 06-04-2014, 06:29 AM

Do not use OEM CSC. Z speed has a heavy duty CSC and Z1 offers a CSC Elimination Kit.

I just installed the Z1 CSCEK this past weekend. I did the install in my garage with some help. I am very happy with the results. I don't recommend the DIY though - it wasn't fun.

Make sure you also replace the Clutch Master Cylinder at the same time. Ask Joe@Zspeed or John@Z1 for clutch replacement suggestions (whichever one you decide to order your CSC replacement from).

Fountainhead · 06-04-2014, 10:23 AM

Quote:

Originally Posted by JARblue

Do not use OEM CSC. Z speed has a heavy duty CSC and Z1 offers a CSC Elimination Kit.

I just installed the Z1 CSCEK this past weekend. I did the install in my garage with some help. I am very happy with the results. I don't recommend the DIY though - it wasn't fun.

Make sure you also replace the Clutch Master Cylinder at the same time. Ask Joe@Zspeed or John@Z1 for clutch replacement suggestions (whichever one you decide to order your CSC replacement from).

Agree, no more trouble to bleed a new master and new CSC than the CSC alone. Plus, you should bench bleed the master before installing, get as much fluid in there as you can to avoid having to push that much more air down to the CSC port. Nothing like having to push air downhill to get it out when it naturally wants to rise to the top....

06-04-2014, 05:46 AM	#1 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 64 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 16	Very little clutch! Got in the car this morning and the clutch pedal is engaging an inch from the bottom and the pedal has a ton of play at the top. It was fine all day yesterday. Any suggestions? __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

06-04-2014, 05:54 AM	#2 (permalink)
N0SL3N Enthusiast Member Join Date: Nov 2011 Location: Toronto Posts: 376 Drives: 2009 PG 370z 6MT Rep Power: 34	Temporary - Replace fluid with RBF600 Permanent - Replace CSC, while you are at it replace the MC, flywheel and clutch __________________ \| Akuma \| Motordyne \| Z1 \| NST \| CNT \| Stillen \| Avant Garde \| RJM \| Performix \| Tint \| LED \| GTR \| Nissan \|

06-04-2014, 06:27 AM	#4 (permalink)
N0SL3N Enthusiast Member Join Date: Nov 2011 Location: Toronto Posts: 376 Drives: 2009 PG 370z 6MT Rep Power: 34	Either the zspeed hd csc or the z1 external csc. The z1 product is newer and I believe takes a few extra steps to install so that it can be mounted externally, but it allows you to service without removing the tranny. Can't go wrong with either. I have the zspeed one. __________________ \| Akuma \| Motordyne \| Z1 \| NST \| CNT \| Stillen \| Avant Garde \| RJM \| Performix \| Tint \| LED \| GTR \| Nissan \|

06-04-2014, 06:29 AM	#5 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Do not use OEM CSC. Z speed has a heavy duty CSC and Z1 offers a CSC Elimination Kit. I just installed the Z1 CSCEK this past weekend. I did the install in my garage with some help. I am very happy with the results. I don't recommend the DIY though - it wasn't fun. Make sure you also replace the Clutch Master Cylinder at the same time. Ask Joe@Zspeed or John@Z1 for clutch replacement suggestions (whichever one you decide to order your CSC replacement from). Fountainhead likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RJM Clutch Pedal System for 370Z - Fully Customizable Clutch Feel & Stroke	Ryan @ RJM	Drivetrain/Engine	612	03-17-2023 10:38 PM
Don't Be A Victim of No Clutch November - Rev Works SouthBend Clutch Specials	Marti	Drivetrain/Engine	36	12-31-2013 11:48 AM
Competition Clutch / Spec Clutch / Clutch Master and Flywheels from ERZperformance	ERZperformance	Drivetrain/Engine	60	09-11-2013 02:08 PM
Clutch Masters FX100-FX400 Clutch Kits ON SALE!	R/T Tuning	Drivetrain/Engine	5	05-22-2013 09:36 AM
very loud clutch chatter when in first gear and i depress the clutch...	TheSnakeJake	Engine & Drivetrain	30	04-25-2010 12:07 AM