Pulley

paratrooper · 05-16-2014, 10:21 AM

Wanting to do a lightweight pulley on my 14' with 200 miles on it but didn't know if you guys would choose one over another?

Will a pulley, exhaust and g3's cost me my factory warranty ?

Thanks!

jwick · 05-16-2014, 10:47 AM

Nothing costs you your factory warranty. If you add an aftermarket part and the dealer can prove that addition caused your failure, whatever failure that might be, they can refuse to cover the repair under warranty.

G3 and Exhaust should not affect anything. The pulley would probably prevent you from having any engine warranty item covered but it'll be specific to your dealer.

DEpointfive0 · 05-16-2014, 11:05 AM

Quote:

Originally Posted by jwick

Nothing costs you your factory warranty. If you add an aftermarket part and the dealer can prove that addition caused your failure, whatever failure that might be, they can refuse to cover the repair under warranty.

G3 and Exhaust should not affect anything. The pulley would probably prevent you from having any engine warranty item covered but it'll be specific to your dealer.

And if you have any major engine problems, revert to stock and you'll be fine

paratrooper · 05-16-2014, 11:53 AM

I figured this would be the case but I wanted to hear from someone smarter than I.

Sounds like the pulley may not be super easy to do but I figure I'll go for it anyway. I think I'll go with the Stillen pulley unless there are any objections ?

luigi90210 · 05-17-2014, 07:28 PM

if you have motor problems, good luck getting that pulley off the car

iirc there was a video GTM posted forever ago where a lightweight pulley fused to the shaft and made it literally impossible to remove(i think it has to be torched off)

just stick to basic bolt ons until you're out of the 3 year/36k warranty

jwick · 05-17-2014, 07:48 PM

Quote:

Originally Posted by luigi90210

if you have motor problems, good luck getting that pulley off the car

iirc there was a video GTM posted forever ago where a lightweight pulley fused to the shaft and made it literally impossible to remove(i think it has to be torched off)

just stick to basic bolt ons until you're out of the 3 year/36k warranty

Not a fan of pulleys either

Joepro · 05-17-2014, 08:31 PM

I took mine off when I boosted the car, it came right off...but in hind sight, it was a waste for the weight it drops, go with a LW flywheel instead, that will drop some weight.

DEpointfive0 · 05-17-2014, 08:55 PM

Quote:

Originally Posted by luigi90210

if you have motor problems, good luck getting that pulley off the car

iirc there was a video GTM posted forever ago where a lightweight pulley fused to the shaft and made it literally impossible to remove(i think it has to be torched off)

just stick to basic bolt ons until you're out of the 3 year/36k warranty

We started trusting GTM when exactly? Lol

Quote:

Originally Posted by Joepro

I took mine off when I boosted the car, it came right off...but in hind sight, it was a waste for the weight it drops, go with a LW flywheel instead, that will drop some weight.

And

but this is cheaper (granted for MUCH less gains) but it's worth it IMO

luigi90210 · 05-19-2014, 12:20 PM

Quote:

Originally Posted by DEpointfive0

We started trusting GTM when exactly? Lol

And

but this is cheaper (granted for MUCH less gains) but it's worth it IMO

lol well i trust that because they had a video of them attempting to impact it off and then eventually torching the sucker off, iirc it was either a stillen underdrive pulley or stillens lightweight pulley one of the 2

05-16-2014, 10:21 AM	#1 (permalink)
paratrooper Base Member Join Date: Apr 2014 Location: Indianapolis, IN Posts: 173 Drives: 14 Nissan 370Z MB M6 Rep Power: 12	Pulley Wanting to do a lightweight pulley on my 14' with 200 miles on it but didn't know if you guys would choose one over another? Will a pulley, exhaust and g3's cost me my factory warranty ? Thanks!

05-16-2014, 10:47 AM	#2 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Nothing costs you your factory warranty. If you add an aftermarket part and the dealer can prove that addition caused your failure, whatever failure that might be, they can refuse to cover the repair under warranty. G3 and Exhaust should not affect anything. The pulley would probably prevent you from having any engine warranty item covered but it'll be specific to your dealer. Trips, jaytirbhaw and DEpointfive0 like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

05-17-2014, 07:28 PM	#5 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 15	if you have motor problems, good luck getting that pulley off the car iirc there was a video GTM posted forever ago where a lightweight pulley fused to the shaft and made it literally impossible to remove(i think it has to be torched off) just stick to basic bolt ons until you're out of the 3 year/36k warranty jwick likes this. __________________ SOLD 370z New Car:classified DD:2011 Mini Cooper S stock

05-17-2014, 08:31 PM	#7 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I took mine off when I boosted the car, it came right off...but in hind sight, it was a waste for the weight it drops, go with a LW flywheel instead, that will drop some weight. luigi90210 likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NST Pulley	dimitarm	Intake/Exhaust	27	05-06-2014 06:51 AM
Pulley Kit	jlask370	Tuning	3	07-09-2013 06:12 PM
Pulley help	hardroc86	Engine & Drivetrain	3	02-17-2012 09:39 PM
[WTB] NST UD pulley kit	ben1620	Parts for sale (Private Classifieds)	1	01-12-2012 06:25 PM
Pulley	>135I	Nissan 370Z General Discussions	4	05-22-2009 04:06 PM

05-16-2014, 11:53 AM	#4 (permalink)
paratrooper Base Member Join Date: Apr 2014 Location: Indianapolis, IN Posts: 173 Drives: 14 Nissan 370Z MB M6 Rep Power: 12	I figured this would be the case but I wanted to hear from someone smarter than I. Sounds like the pulley may not be super easy to do but I figure I'll go for it anyway. I think I'll go with the Stillen pulley unless there are any objections ?