400 whp on N/A VQ possible?

MILENKOGT · 09-01-2015, 06:50 PM

What is JWT doing to upgrade the Intake side? of the VVEL?

Elmo370z · 09-01-2015, 09:01 PM

Special cam conversion, all they said

derraj06 · 09-03-2015, 03:46 PM

In the past JWT swapped to HR heads to get around VVEL. I'll be interested to see what they come up with for VHR heads.

Elmo370z · 09-03-2015, 06:43 PM

Yeah, they make a kit, but it is alot of work. I rather put that into my build

Spooler · 09-03-2015, 10:02 PM

I am so tempted to go NA because not many do. Cams would be nothing but the price of the cams for me, Install would be on me. I love how 1slow370's car sounded. It sure has me thinking.

Elmo370z · 09-04-2015, 12:26 AM

I bought a spare block, to follow in his step, there is an dry sump setup thst is in prototype right now and would cost around 4 grand.that's not including the tank and an fittings. But i know someone who makes them so i can get them at 5-10 a piece. Only thing is if there is a company willing to put the time and effort to come up with a badass manifold that makes power. Ecu tek has already proven with a good tuner, you make more power than with an uprev tune. If you install the cams ill. Drive up to ga and pay you to n put them in for me.

Spooler · 09-12-2015, 11:17 PM

I have been researching the way to get around the need for a dry sump. The only way is to keep the rpm's stock. There is an old saying, "There is no replacement for displacement". For a dry sump, it would run for a kit 5K or so. For a stroker kit, it is about the same. Both will need to have the engine removed. IMO, a stroker kit would be a sure beat and the way to go with cam upgrades. You can increase the compression ratio at the same time. Labor is on me, so that's not a big deal. You could do LTH's, lightened flywheel, clutch, Cam install, ported heads, or whatever you want while you have the engine out. It would be easier to do the cams and LTH's with the engine out anyway. Cost for everything would be about 7-8K. Just a thought.

Elmo370z · 09-13-2015, 11:36 AM

Yeah, i have a guy here who could get me with the build, time is the issue for him. Im sure there is a way to get around the dry sump, just would take a couple motors to find out.

BGTV8 · 09-13-2015, 04:04 PM

The alternative to a dry sump is a wet sump with external oil pump to overcome the limitations of the OE oil-pump.

Elmo370z · 09-13-2015, 05:40 PM

Welp there you go

Eclipz · 09-13-2015, 08:48 PM

Why have either a stroker kit or a dry sump when you can have both

Sent from my SGH-T999L using Tapatalk

Spooler · 09-13-2015, 08:53 PM

Quote:

Originally Posted by Eclipz

Why have either a stroker kit or a dry sump when you can have both

Sent from my SGH-T999L using Tapatalk

Cost, if your going to sink that much in it you might as well go TT.

Elmo370z · 10-09-2015, 07:40 PM

Well just ordered my long tubes and oil cooler. Tune coming up in a couples months, why, because im going out of the country for a month. Next step, if my csc doesn't go out, ipp heads, jwt stage 2 cam and valvetrain upgrade, manifold.

Elmo370z · 03-21-2016, 12:21 AM

Parts collecting. New 70mm TB's coming in the mail soon. Next is Jwt stage 2 cams and upgraded valvetrain. Next thing I'm thinking over are injectors, I was leaning toward ID750cc.

Dieselg37s · 03-24-2016, 09:52 PM

Quote:

Originally Posted by Elmo370z

Parts collecting. New 70mm TB's coming in the mail soon. Next is Jwt stage 2 cams and upgraded valvetrain. Next thing I'm thinking over are injectors, I was leaning toward ID750cc.

Hello where can I get the 70mm throttle bodies??

09-01-2015, 06:50 PM	#286 (permalink)
MILENKOGT Base Member Join Date: Jun 2015 Location: pensacola, fl Posts: 30 Drives: nissan titan Rep Power: 9	What is JWT doing to upgrade the Intake side? of the VVEL? __________________ 2008 Nissan Titan Crew Cab 2wd JWT C8/S7 cam package, Full Bolt ons 372rwhp/447rwtq Uprev Tuned @ Z1 Motorsports

09-01-2015, 09:01 PM	#287 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Special cam conversion, all they said MILENKOGT likes this.

09-13-2015, 08:48 PM	#296 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 11	Why have either a stroker kit or a dry sump when you can have both Sent from my SGH-T999L using Tapatalk Spooler likes this.

03-21-2016, 12:21 AM	#299 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Parts collecting. New 70mm TB's coming in the mail soon. Next is Jwt stage 2 cams and upgraded valvetrain. Next thing I'm thinking over are injectors, I was leaning toward ID750cc. SS_Firehawk likes this. Last edited by Elmo370z; 03-21-2016 at 02:00 PM.

09-03-2015, 03:46 PM	#288 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 11	In the past JWT swapped to HR heads to get around VVEL. I'll be interested to see what they come up with for VHR heads.

09-03-2015, 06:43 PM	#289 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Yeah, they make a kit, but it is alot of work. I rather put that into my build

09-03-2015, 10:02 PM	#290 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,504 Drives: 2013 Nismo 370z Rep Power: 2684391	I am so tempted to go NA because not many do. Cams would be nothing but the price of the cams for me, Install would be on me. I love how 1slow370's car sounded. It sure has me thinking.

09-04-2015, 12:26 AM	#291 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	I bought a spare block, to follow in his step, there is an dry sump setup thst is in prototype right now and would cost around 4 grand.that's not including the tank and an fittings. But i know someone who makes them so i can get them at 5-10 a piece. Only thing is if there is a company willing to put the time and effort to come up with a badass manifold that makes power. Ecu tek has already proven with a good tuner, you make more power than with an uprev tune. If you install the cams ill. Drive up to ga and pay you to n put them in for me.

09-12-2015, 11:17 PM	#292 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,504 Drives: 2013 Nismo 370z Rep Power: 2684391	I have been researching the way to get around the need for a dry sump. The only way is to keep the rpm's stock. There is an old saying, "There is no replacement for displacement". For a dry sump, it would run for a kit 5K or so. For a stroker kit, it is about the same. Both will need to have the engine removed. IMO, a stroker kit would be a sure beat and the way to go with cam upgrades. You can increase the compression ratio at the same time. Labor is on me, so that's not a big deal. You could do LTH's, lightened flywheel, clutch, Cam install, ported heads, or whatever you want while you have the engine out. It would be easier to do the cams and LTH's with the engine out anyway. Cost for everything would be about 7-8K. Just a thought.

09-13-2015, 11:36 AM	#293 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Yeah, i have a guy here who could get me with the build, time is the issue for him. Im sure there is a way to get around the dry sump, just would take a couple motors to find out.

09-13-2015, 04:04 PM	#294 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	The alternative to a dry sump is a wet sump with external oil pump to overcome the limitations of the OE oil-pump.

09-13-2015, 05:40 PM	#295 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Welp there you go

10-09-2015, 07:40 PM	#298 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295377	Well just ordered my long tubes and oil cooler. Tune coming up in a couples months, why, because im going out of the country for a month. Next step, if my csc doesn't go out, ipp heads, jwt stage 2 cam and valvetrain upgrade, manifold.