Major Vibration Issues - Help

NOBLE|370Z · 04-13-2014, 07:36 PM

I took a video underneath the car of the rear drive shaft, next to the rear wheels, so that you can all see where the vibrating problem could be originating from. I have the car up on jack stands and I take it up to 80km/hr where it starts to get really bad. Notice the noise it makes as it slows down near the end as well.

https://www.youtube.com/watch?v=IhIE...ature=youtu.be

Any thoughts? After the clutch kit was recently installed could the problem be because my mechanic didn't aligned the drive shaft properly? Propeller shaft run out tolerances?

By visual inspection the drive shaft appears to have all of the nuts and bolts tightened down effectively. I guess I'll need to take it to the Nissan dealer to have the drive shaft serviced...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
having major withdrawal's	sonic370	Nissan 370Z General Discussions	29	11-24-2012 12:17 AM
Just hit 30K, need to do any major maintenance?	lifeztream	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	10-15-2011 10:26 PM
Shifter Vibration/ Shift knob vibration	BlackCherryZ	Nissan 370Z General Discussions	31	01-16-2010 10:53 AM
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ??	Christopher	Nissan 370Z General Discussions	19	10-16-2009 04:55 PM
Nissan: A Major Let Down!	Ace	Nissan 370Z General Discussions	20	04-29-2009 03:18 PM

04-13-2014, 07:36 PM	#7 (permalink)
NOBLE\|370Z Base Member Join Date: Sep 2011 Location: Calgary AB Posts: 61 Drives: 09 Nissan 370Z Rep Power: 16	I took a video underneath the car of the rear drive shaft, next to the rear wheels, so that you can all see where the vibrating problem could be originating from. I have the car up on jack stands and I take it up to 80km/hr where it starts to get really bad. Notice the noise it makes as it slows down near the end as well. https://www.youtube.com/watch?v=IhIE...ature=youtu.be Any thoughts? After the clutch kit was recently installed could the problem be because my mechanic didn't aligned the drive shaft properly? Propeller shaft run out tolerances? By visual inspection the drive shaft appears to have all of the nuts and bolts tightened down effectively. I guess I'll need to take it to the Nissan dealer to have the drive shaft serviced...