Who has this part to spare?

axmea? · 01-24-2014, 09:04 PM

Perhaps those who FI'd their cars could help out?

Started the car at work and the CEL went on. Got home, checked under the hood, and saw a pc that attaches to the driver side intake broke off. The part is $140 from the dealership. Comes with the entire OEM MAF tube except the box. I'm thinking not covered under warranty so taking a look if anyone has this pc sitting around in their garage. Put it to good use by helping me out?

Raf

OMGWTFBBQ · 01-24-2014, 09:07 PM

Raf! Maybe you can try undoing those two pinch clamps that hold the rubber tubes in place (silver and black in the picture). Take off those broken pieces and glue the two pieces back together as a temporary solution.

TVPostSound · 01-24-2014, 09:09 PM

Go to a parts store, and get a curved PCV hose that goes directly from your intake tube to the PCV valve.
You dont need that part. Its a "silencer" that really doesnt do much.

mag_black · 01-24-2014, 10:28 PM

^^ provides fresh air to crankcase. That's all I know about it. You could purchase z1 pieces instead.

Trips · 01-24-2014, 10:32 PM

Rafael,

You can take the filter off along with the broken piece and Krazy glue them like Member OMGWTFBBQ Has suggested.

Mine has also broken, and so I just Krazy glued it.

Member Jordo

Did come up with another good solution in another thread thats less expensive and will work.

Quote:

Originally Posted by Jordo!

You need this piece:

Dorman/PCV Valve Elbow (47032) | AutoZone.com

Swap out OEM for this -- problem solved

axmea? · 01-24-2014, 11:26 PM

Thanks for the ideas and forwarding links and such. I'll give it a shot tomorrow morning. I thought about it but figured to rely on the forum's wealth of experience and resources first. This forum is the best!

Raf

axmea? · 01-24-2014, 11:55 PM

I also noticed that the 2013's have a slightly redesigned piece. I went to the dealership this afternoon to check on the part if they had it. Even with the photo, they had to look under the hood a Z in their lot to see what I was talking about.

edit: correction -- I just noticed. It is the same thing but installed the other way around.

Rusty · 01-25-2014, 12:40 AM

Get the hoses from Z1. Dress the engine up a bit.

DEpointfive0 · 01-25-2014, 12:40 AM

Quote:

Originally Posted by Rusty

Get the hoses from Z1. Dress the engine up a bit.

He has the Takedas by the looks of it

Rusty · 01-25-2014, 12:48 AM

Quote:

Originally Posted by DEpointfive0

He has the Takedas by the looks of it

The hoses still should fit. The hose location has to be the same or close to it on the cai.

axmea? · 01-25-2014, 05:33 PM

I ended up buying the silicone replacements from Z1. Tried two different types of epoxy and it still broke during install. It's just a little tight and not a lot of room for movement. I think it's just too much stress on the oem piece that it should be a silicone or rubber hose. I know OEM would just break again if I ordered a new one PLUS it is such a waste of money. $111.00 from courtesy parts for a whole air duct assembly. Thanks again to all.

Joepro · 01-25-2014, 06:37 PM

The z1 hoses fit the takeda intakes, the passenger side it a tight fit tho, the drivers is perfect.

DEpointfive0 · 01-25-2014, 07:31 PM

Quote:

Originally Posted by Joepro

The z1 hoses fit the takeda intakes, the passenger side it a tight fit tho, the drivers is perfect.

I was totally thinking of a different hose Z1 sells, my bad!

axmea? · 01-25-2014, 08:28 PM

Any issues if I only use the driver's side hose and leave the stock one on the passenger side?

snowsurfdirtx · 01-28-2014, 04:32 AM

Quote:

Originally Posted by axmea?

Any issues if I only use the driver's side hose and leave the stock one on the passenger side?

No, but I'd just do both at the same time to match. I went with the red ones, they look good.

01-24-2014, 09:04 PM	#1 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	Who has this part to spare? Perhaps those who FI'd their cars could help out? Started the car at work and the CEL went on. Got home, checked under the hood, and saw a pc that attaches to the driver side intake broke off. The part is $140 from the dealership. Comes with the entire OEM MAF tube except the box. I'm thinking not covered under warranty so taking a look if anyone has this pc sitting around in their garage. Put it to good use by helping me out? Raf __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

01-24-2014, 09:07 PM	#2 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Raf! Maybe you can try undoing those two pinch clamps that hold the rubber tubes in place (silver and black in the picture). Take off those broken pieces and glue the two pieces back together as a temporary solution. axmea? likes this.

01-24-2014, 09:09 PM	#3 (permalink)
TVPostSound Base Member Join Date: Nov 2012 Location: Granada Hills Posts: 73 Drives: 2010G37 AKA 370Z 2+2 Rep Power: 12	Go to a parts store, and get a curved PCV hose that goes directly from your intake tube to the PCV valve. You dont need that part. Its a "silencer" that really doesnt do much. axmea? likes this.

01-24-2014, 10:28 PM	#4 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	^^ provides fresh air to crankcase. That's all I know about it. You could purchase z1 pieces instead. Rusty and axmea? like this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

01-24-2014, 11:26 PM	#6 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	Thanks for the ideas and forwarding links and such. I'll give it a shot tomorrow morning. I thought about it but figured to rely on the forum's wealth of experience and resources first. This forum is the best! Raf DEpointfive0 and blackcherry20 like this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

01-24-2014, 11:55 PM	#7 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	I also noticed that the 2013's have a slightly redesigned piece. I went to the dealership this afternoon to check on the part if they had it. Even with the photo, they had to look under the hood a Z in their lot to see what I was talking about. edit: correction -- I just noticed. It is the same thing but installed the other way around. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 01-25-2014 at 12:02 AM.

01-25-2014, 12:40 AM	#8 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,865 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Get the hoses from Z1. Dress the engine up a bit. Joepro likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-25-2014, 05:33 PM	#11 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	I ended up buying the silicone replacements from Z1. Tried two different types of epoxy and it still broke during install. It's just a little tight and not a lot of room for movement. I think it's just too much stress on the oem piece that it should be a silicone or rubber hose. I know OEM would just break again if I ordered a new one PLUS it is such a waste of money. $111.00 from courtesy parts for a whole air duct assembly. Thanks again to all. blackcherry20 likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

01-25-2014, 06:37 PM	#12 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	The z1 hoses fit the takeda intakes, the passenger side it a tight fit tho, the drivers is perfect. axmea? likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

01-25-2014, 08:28 PM	#14 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	Any issues if I only use the driver's side hose and leave the stock one on the passenger side? __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Part Out - Part Deux	Wiggins3377	Parts for sale (Private Classifieds)	34	06-07-2013 10:17 AM
[FOR SALE] 350Z HR part out, HUGE PART OUT	DEpointfive0	Parts for sale (Private Classifieds)	1	02-19-2013 01:56 PM
[FOR SALE] Nick's Part Out Thread (Sport Rays, Spare Tire, Subwoofer, Seats, Fobs and more)	nick3237	Parts for sale (Private Classifieds)	33	10-27-2012 02:53 PM
[FOR SALE] 98intrigue's pretty large part out: Part 2	98intrigue	Parts for sale (Private Classifieds)	25	04-30-2012 08:20 PM
Replacement of Base Spare With Sports Pkg. Spare	GonGo	DIY Section (Do-It-Yourself)	7	05-18-2011 09:46 PM