Whiteline Diff Bushings Question

Originally Posted by 1slow370

yep they are all the 350z bushings whether you get the whiteline or the energy suspension, and there is no modification to the bushings necessary . Also when i did the rear diff bushing i made a puller for it but it kept breaking the puller so i got out the sheet metal bit for my air chisel and and put the center tang right between the the outer shell of the bushing and the hole in the subframe and just cut the shell straight through the bushing coming from the transmission side and after it got half way through the bushing it actually folded and pushed it right out. It is OK to destroy the outer steel shell even if you go with energy suspension as those need the INNER steel piece that the nut goes in. Also if your good you can use a pry bar to push the rear bushing into the subframe from the back of the car.