![]() |
Some DTCs are "permanent" (until you manually clear them) and others will clear themselves when the error condition disappears or a drive cycle has been successfully completed. Make sure that
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#2 (permalink) |
|
Premium Member
![]() Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324200 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Some DTCs are "permanent" (until you manually clear them) and others will clear themselves when the error condition disappears or a drive cycle has been successfully completed. Make sure that your scanner is looking for all DTCs. If nothing shows up, you might want to leave the scanner connected for a while so you can read the error code if it happens again.
I'm guessing that you had an injector problem (piece of dirt?) that eventually cleared itself, but that's just a wild guess at this point. Edit: Read through the topic you linked to. Have you checked the crank position sensor? It could cause your symptoms.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma Last edited by SouthArk370Z; 05-05-2013 at 12:13 PM. |
|
|
|
| Bookmarks |
|
|