Injector power gain with NA?

lemon-fresh · 10-16-2012, 06:15 PM

Crazy, I've been reading up on the NST kit and haven't heard anything negative about them.

NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

Could you guys point me to some examples?

SS_Firehawk · 10-16-2012, 10:58 PM

MY pulley's kick arse. Best $190 I spent ever (Group Buy). I'm biased and defend em vehemently. It's the one mod where I found the difference instantly noticeable. Redline should stay stock unless your running out of RPM at the track and it's more beneficial to stay in that gear than shift. Changing exhaust cams and intake manifold can move it. But I believe the Motordyne manifold would regress power peak by a few hundred rpm with it's longer runners. There is still power over 7.5k, but you are on the other side of the hill.

lemon-fresh · 10-17-2012, 10:39 AM

Quote:

Originally Posted by SS_Firehawk

MY pulley's kick arse. Best $190 I spent ever (Group Buy). I'm biased and defend em vehemently. It's the one mod where I found the difference instantly noticeable. Redline should stay stock unless your running out of RPM at the track and it's more beneficial to stay in that gear than shift. Changing exhaust cams and intake manifold can move it. But I believe the Motordyne manifold would regress power peak by a few hundred rpm with it's longer runners. There is still power over 7.5k, but you are on the other side of the hill.

Not the first time I've heard that. I'm pulling the trigger on a set. How long did it take your mechanic to do the installation?

edub370 · 10-17-2012, 10:59 AM

Quote:

Originally Posted by lemon-fresh

Not sure that's much of a horror story. The same thing can happen to the stock pulleys over time. Why would you want to remove them?

to go to a supercharger. light weight pulleys usually wont work well with sc's

there's a vid floating around youtube somewhere showing the lengths a company is having to do to remove a lw crank pulley that is fused to the crank. maybe someone can chime in on who/where this vid is

lemon-fresh · 10-17-2012, 11:30 AM

Yea, I won't be going beyond 500hp on this car so it should be fine. You also need to make sure to add an anti-seizing compound before you install them. Same thing can happen to the stock pulleys.

SS_Firehawk · 10-17-2012, 12:45 PM

I had pulley's done with my CAI , intake manifold and oil cooler. Mechanics had the car for a couple days. They mentioned the alternator pulley difficult to reach and takes some effort to get them off. The key was tight on the crank pulley, they just shaved it a bit and got it on there. They got that done in about 4 hours. IT helped the front end was taken apart while working on it.

10-16-2012, 10:58 PM	#17 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	MY pulley's kick arse. Best $190 I spent ever (Group Buy). I'm biased and defend em vehemently. It's the one mod where I found the difference instantly noticeable. Redline should stay stock unless your running out of RPM at the track and it's more beneficial to stay in that gear than shift. Changing exhaust cams and intake manifold can move it. But I believe the Motordyne manifold would regress power peak by a few hundred rpm with it's longer runners. There is still power over 7.5k, but you are on the other side of the hill. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

10-17-2012, 12:45 PM	#21 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	I had pulley's done with my CAI , intake manifold and oil cooler. Mechanics had the car for a couple days. They mentioned the alternator pulley difficult to reach and takes some effort to get them off. The key was tight on the crank pulley, they just shaved it a bit and got it on there. They got that done in about 4 hours. IT helped the front end was taken apart while working on it. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changing to Red Line synthetic, gonna gain some power!	ImportConvert	Engine & Drivetrain	20	03-16-2012 03:46 AM
OEM injector duty cycle	Megan370z	Tuning	2	01-30-2012 05:41 AM
New and looking for some power gain imput	Nismo221	Engine & Drivetrain	12	09-09-2010 11:58 PM
what injector cleaner?	thegraylady	Engine & Drivetrain	6	02-10-2010 12:41 PM

10-16-2012, 06:15 PM	#16 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 39 Posts: 471 Drives: 09 370z Rep Power: 13	Crazy, I've been reading up on the NST kit and haven't heard anything negative about them. NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts Could you guys point me to some examples?

10-17-2012, 11:30 AM	#20 (permalink)
lemon-fresh Enthusiast Member Join Date: Mar 2012 Location: Calgary Age: 39 Posts: 471 Drives: 09 370z Rep Power: 13	Yea, I won't be going beyond 500hp on this car so it should be fine. You also need to make sure to add an anti-seizing compound before you install them. Same thing can happen to the stock pulleys.