Z1 Oil Cooler Makes Oil Cooler

Compdoc777 · 08-18-2012, 09:59 PM

If you read about the oil guy oil temps should remain around 200-210 and this will make the motor and oil last longer.

I have the exact setup and can terrorize the freeway running high rpm and can't get over 220.

jcosta79 · 08-18-2012, 10:06 PM

Quote:

Originally Posted by Compdoc777

If you read about the oil guy oil temps should remain around 200-210 and this will make the motor and oil last longer.

I have the exact setup and can terrorize the freeway running high rpm and can't get over 220.

That's exactly my point. The OP said he was seeing 220-225 after running hard on the highway before putting on the oil cooler. If he wasn't going to track the car I wouldn't worry about seeing those temps. It's not high enough to cause any damage.

I'd be more concerned with running too cool than running 220-225.

If water temp was normal then I wouldn't worry about 225 oil temps.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
A 19 or 25 Row Oil Cooler - Which makes more sense?	SalA	Intake/Exhaust	5	04-23-2012 05:03 PM
[FOR SALE] AT Transmission Cooler with Setrab 19 Row cooler	zakimak	Parts for sale (Private Classifieds)	4	03-03-2012 11:44 AM
Oil cooler orientation (Z1 cooler)	BrandonT	Engine & Drivetrain	10	05-23-2011 08:26 AM

08-18-2012, 09:59 PM	#1 (permalink)
Compdoc777 Enthusiast Member Join Date: Dec 2011 Location: Cypress Posts: 277 Drives: 2011 Nismo #4 MB Rep Power: 14	If you read about the oil guy oil temps should remain around 200-210 and this will make the motor and oil last longer. I have the exact setup and can terrorize the freeway running high rpm and can't get over 220.