Review: RJM AFP Clutch Pedal System

OTL · 07-09-2015, 08:38 AM

I just wanted to ask some questions regarding the settings of RJM. On the instruction, it says the initial setting at 70%. Do I adjust the setting from 70%? As in turning left or right from the initial setting being at 70%?
also, how far does the clutch rod have to be sticking inside the fork? Thank you!

1991Z32 · 07-09-2015, 11:20 PM

Just pushed the buy button. Can't wait!

JARblue · 07-19-2015, 03:58 PM

Quote:

Originally Posted by OTL

I just wanted to ask some questions regarding the settings of RJM. On the instruction, it says the initial setting at 70%. Do I adjust the setting from 70%? As in turning left or right from the initial setting being at 70%?
also, how far does the clutch rod have to be sticking inside the fork? Thank you!

I turned the dial all the way to the left and made a reference mark using a silver sharpie. Then I turned it all the way to the right to find the maximum, counting the number of turns. I found the 70% setting using those as reference points.

The fork that connects to the master cylinder rod is meant to be adjustable (pretty much the only adjustment you can make to the OEM pedal). I can't remember exactly, but I believe there is some guidance in the instructions. When I installed mine, I just made note of where the OEM pedal fork was and tried to make it about the same to start. Maybe someone else has some insight that is more helpful.

07-09-2015, 11:20 PM	#2 (permalink)
1991Z32 Base Member Join Date: Jan 2015 Location: Orlando, FL Posts: 81 Drives: 2010 40th 6MT S/T Rep Power: 1107	Just pushed the buy button. Can't wait! madwi likes this. __________________ 2010 40th Anniversary #564 \|\| NISMO CBE \|\| Hankook Ventus V12 Evo2s \|\| RJM Clutch Pedal Assembly

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
light clutch pedal?	boosted180	Engine & Drivetrain	21	06-07-2014 01:53 PM
My clutch pedal became useless for a little while...	Vbp6US	Engine & Drivetrain	17	07-01-2012 05:48 PM
Clutch pedal gone bad	brakedrift12	Nissan 370Z General Discussions	5	07-04-2011 10:09 PM
clutch pedal issues?	xgrudgex	Engine & Drivetrain	17	01-31-2011 08:44 PM
Knock from the clutch pedal	Oscar135	Engine & Drivetrain	34	07-27-2010 12:10 PM

07-09-2015, 08:38 AM	#1 (permalink)
OTL Base Member Join Date: Sep 2014 Location: Coral Springs, FL Posts: 8 Drives: 14 nissan 370Z Rep Power: 12	I just wanted to ask some questions regarding the settings of RJM. On the instruction, it says the initial setting at 70%. Do I adjust the setting from 70%? As in turning left or right from the initial setting being at 70%? also, how far does the clutch rod have to be sticking inside the fork? Thank you!