Nitrous Install

ocean.mirage · 02-08-2012, 12:05 PM

I have a mechanic installing a ZEX nitrous kit on my 370z. He had a few questions about the install...

1. Do how do you mount the nozzles on the intake tubes. I have Injen long tube intakes and the tube wall is pretty thin on them, if you have mounted this yourself, let me know how and how solid it has been for you.

2. If I wanted to do the 100 shot, In your opinion/Experience, Do I need to change the timing.

Thank you, I posted these questions on another thread but had no answers come back, so I started a new one.

semtex · 02-08-2012, 12:13 PM

I'd be a little nervous if my mechanic was asking these questions. I think most people have a professional mechanic do certain installs because they want to rely on the mechanic's experience. Just something to consider.

StLRedrider · 02-08-2012, 12:25 PM

you might want to consult the manufacturer, that way if something happens you should be covered.

ocean.mirage · 02-08-2012, 12:34 PM

He works on some pretty nice cars at the mercedes dealership, but has never done a nitrous install. He said it is easy enough, he justed wanted to make sure the spray nozzles are very solidly mounted. and wanted to know what guys were doing for timing with a hundred shot thats all. (In your experience) also, if anyone has a pic of their intake, thatd be great.

ChipsWithDips · 02-08-2012, 01:01 PM

In before the blown engine.

erkthejerk73 · 02-08-2012, 01:06 PM

id call the manufacturer also, id also go ahead and buy some new piston rings you are about to fry

StLRedrider · 02-08-2012, 01:11 PM

Quote:

Originally Posted by ChipsWithDips

In before the blown engine.

Nixlimited · 02-08-2012, 01:30 PM

Quote:

Originally Posted by ocean.mirage

He works on some pretty nice cars at the mercedes dealership, but has never done a nitrous install. He said it is easy enough, he justed wanted to make sure the spray nozzles are very solidly mounted. and wanted to know what guys were doing for timing with a hundred shot thats all. (In your experience) also, if anyone has a pic of their intake, thatd be great.

Please be smart and save yourself the 10K on a new motor by either: (1) taking the car to a person with relevant experience or (2) avoiding the nitrous kit altogether.

NeverBoneStck · 02-08-2012, 01:34 PM

I'm doing my own nitrous install and honestly if your mechanic who works on high end cars cannot read the manual or figure out nozzle placement you better run.. It's really that simple ... GOOD LUCK !!!!!

NeverBoneStck · 02-08-2012, 01:35 PM

Quote:

Originally Posted by Nixlimited

Please be smart and save yourself the 10K on a new motor by either: (1) taking the car to a person with relevant experience or (2) avoiding the nitrous kit altogether.

Why avoid the nitrous kit ???

NeverBoneStck · 02-08-2012, 01:36 PM

Quote:

Originally Posted by ocean.mirage

He works on some pretty nice cars at the mercedes dealership, but has never done a nitrous install. He said it is easy enough, he justed wanted to make sure the spray nozzles are very solidly mounted. and wanted to know what guys were doing for timing with a hundred shot thats all. (In your experience) also, if anyone has a pic of their intake, thatd be great.

Do a search on nitrous install and u will see my pics ...

ocean.mirage · 02-08-2012, 01:43 PM

We looked at the instructions, and just figured that the way the nozzles were mounted seemed a little flimsy.

erkthejerk73 · 02-08-2012, 01:53 PM

can you post pics?

cc370z · 02-08-2012, 02:19 PM

I don't know why people on this forum are so against nitrous. I've ran nitrous on many of my past cars with no issues. If you take the correct safety precautions theirs is no reason why nitrous isn't a safe and reliable power adder. But you need a competent installer. (not saying yours is not)

NeverBoneStck install is looking very good and super clean. I would follow his build and make changes that fit your needs.

fuct · 02-08-2012, 04:15 PM

this thread has BOOM written all over it...

02-08-2012, 12:05 PM	#1 (permalink)
ocean.mirage Base Member Join Date: Jul 2010 Location: Canada Posts: 71 Drives: 2010 370z 40th Anniv Rep Power: 14	Nitrous Install I have a mechanic installing a ZEX nitrous kit on my 370z. He had a few questions about the install... 1. Do how do you mount the nozzles on the intake tubes. I have Injen long tube intakes and the tube wall is pretty thin on them, if you have mounted this yourself, let me know how and how solid it has been for you. 2. If I wanted to do the 100 shot, In your opinion/Experience, Do I need to change the timing. Thank you, I posted these questions on another thread but had no answers come back, so I started a new one.

02-08-2012, 12:13 PM	#2 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	I'd be a little nervous if my mechanic was asking these questions. I think most people have a professional mechanic do certain installs because they want to rely on the mechanic's experience. Just something to consider. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

02-08-2012, 12:25 PM	#3 (permalink)
StLRedrider A True Z Fanatic Join Date: Jan 2009 Location: St.louis,Mo Posts: 17,755 Drives: O9Sprt/Touring,p-51 Rep Power: 60	you might want to consult the manufacturer, that way if something happens you should be covered. __________________ Dream as if you'll live forever, live as if you'll die today J.Dean

02-08-2012, 01:01 PM	#5 (permalink)
ChipsWithDips Enthusiast Member Join Date: Mar 2011 Location: Austin, TX Posts: 279 Drives: '11 Gunmetal 370Z MT Rep Power: 14	In before the blown engine. luigi90210 likes this.

02-08-2012, 01:34 PM	#9 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	I'm doing my own nitrous install and honestly if your mechanic who works on high end cars cannot read the manual or figure out nozzle placement you better run.. It's really that simple ... GOOD LUCK !!!!! __________________ Juiced! That is all you need to know !!

02-08-2012, 12:34 PM	#4 (permalink)
ocean.mirage Base Member Join Date: Jul 2010 Location: Canada Posts: 71 Drives: 2010 370z 40th Anniv Rep Power: 14	He works on some pretty nice cars at the mercedes dealership, but has never done a nitrous install. He said it is easy enough, he justed wanted to make sure the spray nozzles are very solidly mounted. and wanted to know what guys were doing for timing with a hundred shot thats all. (In your experience) also, if anyone has a pic of their intake, thatd be great.

02-08-2012, 01:06 PM	#6 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	id call the manufacturer also, id also go ahead and buy some new piston rings you are about to fry

02-08-2012, 01:43 PM	#12 (permalink)
ocean.mirage Base Member Join Date: Jul 2010 Location: Canada Posts: 71 Drives: 2010 370z 40th Anniv Rep Power: 14	We looked at the instructions, and just figured that the way the nozzles were mounted seemed a little flimsy.

02-08-2012, 01:53 PM	#13 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	can you post pics?

02-08-2012, 02:19 PM	#14 (permalink)
cc370z Enthusiast Member Join Date: Jan 2010 Location: AZ Posts: 467 Drives: 09 370z Rep Power: 15	I don't know why people on this forum are so against nitrous. I've ran nitrous on many of my past cars with no issues. If you take the correct safety precautions theirs is no reason why nitrous isn't a safe and reliable power adder. But you need a competent installer. (not saying yours is not) NeverBoneStck install is looking very good and super clean. I would follow his build and make changes that fit your needs.

02-08-2012, 04:15 PM	#15 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	this thread has BOOM written all over it...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nitrous	tyler20c	Intake/Exhaust	20	12-18-2012 07:43 PM
nitrous?	Snakes709	Forced Induction	67	07-26-2011 10:34 AM
Nitrous	oreoleo	Forced Induction	5	08-30-2010 08:52 AM
Would anyone ever consider Nitrous?	ZforMe	Intake/Exhaust	32	04-25-2009 09:10 PM