Z1 oil cooler, oil filter

reldas · 12-07-2011, 06:53 AM

looking to purchase this cooler, can you use the Valvoline vo-19 oil filter on this with out problems? or can anyone that has this cooler install tell me what one they are using?

Thanks In advance

MattP725 · 12-07-2011, 12:32 PM

All the stock fitting oil filters will work with the kit, there is plenty of clearance even with the sandwhich plate. I run the Pure 1 (a bit longer) and I have no problems. I've heard some people run the GTR filters which are even longer still I believe, that I cannot comment on.

Dustin@Z1 · 12-07-2011, 01:11 PM

Quote:

Originally Posted by reldas

looking to purchase this cooler, can you use the Valvoline vo-19 oil filter on this with out problems? or can anyone that has this cooler install tell me what one they are using?

Thanks In advance

I am not familiar with that exact filter, but any standard length 370Z oil filter will fit just fine on the Austrailian-spec 370Zs with our oil cooler kit. You MAY run into fitment issues when using the longer G37/GTR filters. This is due to the stacking height of the Mocal Sandwich plate on top of your car's existing oil-to-water oil cooler (found previously, ONLY on the Middle Eastern and Austrailian models). The factory cooler on your 370Z is roughly 2" in thickness.

I just checked out our shop 370Z on the lift and "guesstimated" the added thickness of the OEM oil-to-water sandwich plate along with the longer G37 Sedan oil filter. I think it MAY BE possible, but a real pain to accomplish.

By all means PM me if you have any questions with any of our products including our oil cooler kits!

reldas · 12-07-2011, 06:55 PM

thats great to hear, as long as i can use the stock OEM 370z filter i am happy

12-07-2011, 06:53 AM	#1 (permalink)
reldas Base Member Join Date: Aug 2011 Location: Sydney Posts: 144 Drives: 09 Nissan 370z auto Rep Power: 13	Stillen oil cooler looking to purchase this cooler, can you use the Valvoline vo-19 oil filter on this with out problems? or can anyone that has this cooler install tell me what one they are using? Thanks In advance Last edited by reldas; 12-07-2011 at 07:42 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
What oil filter to use with Oil Cooler sandwich adapter?	atx370z	Engine & Drivetrain	11	03-26-2014 10:36 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
stillen oil cooler fram filter x-reference issue	Nitrouz	Engine & Drivetrain	4	04-28-2011 05:32 PM
Filter-Mag oil filter magnet	6MT	Canada	0	08-25-2009 04:01 PM

12-07-2011, 12:32 PM	#2 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	All the stock fitting oil filters will work with the kit, there is plenty of clearance even with the sandwhich plate. I run the Pure 1 (a bit longer) and I have no problems. I've heard some people run the GTR filters which are even longer still I believe, that I cannot comment on.

12-07-2011, 06:55 PM	#4 (permalink)
reldas Base Member Join Date: Aug 2011 Location: Sydney Posts: 144 Drives: 09 Nissan 370z auto Rep Power: 13	thats great to hear, as long as i can use the stock OEM 370z filter i am happy