Installed B&M 45163 short shift kit in 370Z yesterday...

The HACK · 06-08-2009, 05:57 PM

Quote:

Originally Posted by miguez

Sounds like sound advice, Hack, I'll get some lock washers.

I wonder if that's what happened to Killer Bee, making him lose the reverser lockout?

Yes.

Quote:

Originally Posted by Phimosis

I haven't heard his story, but if you install the shifter like this:

you'll lose the lockout. it needs to have the stock aluminum plate over the top of the blue anodized B&M plate in order for the lockout to work. If you do it like this:

your lockout will work.

-Phim

Yes. However the top plate may move far enough to the right for the lock-out feature to not work. Hence the recommendation was to get serrated lock washers to prevent the top plate from moving around due to use.

Quote:

Originally Posted by Phimosis

to avoid detroying your knob, try using a towel over the knob, then grab it with a clamp or a monkey wrench, rather than using channel locks. You'll exert much less force on the knob. Then you rely on the elliptical shape of the knob to get your traction for turning it. My knob got a few scuffs, but is not ruined:

-Phim

That is about as good as I've seen it done. I've done this shifter in several 350Zs and saw Killer Bee's shifter installed, and frankly it is IMPOSSIBLE to get the knob off without at least some sort of minor marks on it. Even the picture posted with the knob in the clamp after the assembly was removed, left small indentations in the knob. On my 350Z I ended up just buying a new knob from Nissan.

m4a1mustang · 06-08-2009, 06:15 PM

Any idea how much a new knob will run?

06-08-2009, 06:15 PM	#2 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6964	Any idea how much a new knob will run? __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z short shifter	theDreamer	Engine & Drivetrain	27	06-05-2009 03:44 AM
Sigh, almost had a 370Z yesterday..	Diversion	Nissan 370Z Pricing / Ordering Discussions	11	04-15-2009 08:13 AM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 02:28 PM
New memeber - ordered my 370Z yesterday	Skorch	New 370Z Owner	5	02-23-2009 11:36 AM
Just got mine 370Z yesterday!	salsero67	New 370Z Owner	15	01-09-2009 06:42 PM