|
if its a REALLY loud tin can could be bad clutch chatter and your pressure plate fingers could be bent or misshapen. also the throw out bearing a little hydraulic
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
01-05-2011, 05:33 AM
|
#6 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,733
Drives: v8 74 260z ;)
Rep Power: 7253   |
if its a REALLY loud tin can could be bad clutch chatter and your pressure plate fingers could be bent or misshapen.
also the throw out bearing a little hydraulic cylinder with a bearing on the end of it that pushes the clutch in, when ever the dealer replaces a tranny the manual says they have to change it out so it probably isn't the real problem neither is the tranny unless you are getting two defective ones in a row(witch doesn't really happen). thats why i say i would suspect the clutch and flywheel if it is loud enough. some aftermarket clutches will chatter too just because they aren't dampened like stock ones are
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 01-05-2011 at 05:38 AM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370z vs g37 tranny | zellsexy | Engine & Drivetrain | 2 | 07-30-2010 04:28 PM |
| Tranny whine | cruzmisl | Engine & Drivetrain | 15 | 07-16-2010 03:32 PM |
| thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ?? | Christopher | Nissan 370Z General Discussions | 19 | 10-16-2009 04:55 PM |
| Initial Z issues that are now non-issues...... | cave vulture | Nissan 370Z General Discussions | 1 | 09-06-2009 11:19 PM |
| Hot Oil? At Least it's Not the GT-R Tranny... | TheWeatherman | Nissan 370Z General Discussions | 9 | 05-19-2009 12:14 PM |
Threaded Mode
