Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

eastwest2300 · 07-20-2015, 09:25 PM

Quote:

Originally Posted by SerialCoderer

You are right! It is time I stop going to the dealer. I just need to find a reputable place now out in Jersey.

If there was any chance you could make it out here in Maryland.. There's AAM, they do excellent work, you'd be in and out in about a day.

eastwest2300 · 07-20-2015, 09:26 PM

I thermal wrapped the lines on my new zspeed CSC today, it looks pretty dope.. install day is this friday at AAM!!! Im stoked!

firulice · 07-20-2015, 09:39 PM

What's the link for the thermal wrap?

eastwest2300 · 07-20-2015, 09:47 PM

sh1t, I'm gonna have to look it up.. standby.

eastwest2300 · 07-20-2015, 09:49 PM

Thermo Tec 14010 Thermo Sleeve | eBay

This is what I got, it'll run ya roughly $20, you'll use up 70% of it, if you do both lines on the CSC..

If you buy it from this seller, he's out of NY, I don't know how the hell it took 6 days shipping from NY to DC..

eastwest2300 · 07-20-2015, 09:53 PM

and with that being said, I'm out... off to bed.. 0530 is gonna smack me in the face.

KoolKarmaJoe · 07-20-2015, 09:58 PM

Quote:

Originally Posted by eastwest2300

Thermo Tec 14010 Thermo Sleeve | eBay

This is what I got, it'll run ya roughly $20, you'll use up 70% of it, if you do both lines on the CSC..

If you buy it from this seller, he's out of NY, I don't know how the hell it took 6 days shipping from NY to DC..

DEI Titanium Exhaust Wrap works well to shield from Exhaust heat. I've used it on headers, Exhaust pipes, etc on many cars to help keep engine compartment & drive train areas protected from heat from headers/pipes. Good stuff, last long time, doesn't require pre-soak.

Sent from my XT1254 using Tapatalk

firulice · 07-20-2015, 10:23 PM

Quote:

Originally Posted by eastwest2300

Thermo Tec 14010 Thermo Sleeve | eBay

This is what I got, it'll run ya roughly $20, you'll use up 70% of it, if you do both lines on the CSC..

If you buy it from this seller, he's out of NY, I don't know how the hell it took 6 days shipping from NY to DC..

Thank you!

firulice · 07-20-2015, 10:26 PM

http://www.amazon.com/Thermo-Tec-140...7X986QMY14FJR7

Same thing right?

firulice · 07-20-2015, 10:30 PM

Would this work well? http://www.amazon.com/Thermo-Tec-135...CZ8FCDH702QG64

I'm thinking it should help keep my fluid from getting as hot?

eastwest2300 · 07-21-2015, 06:19 AM

Quote:

Originally Posted by firulice

Thank you!

You're welcome bro.

eastwest2300 · 07-21-2015, 06:23 AM

Quote:

Originally Posted by firulice

Amazon.com: Thermo-Tec 14010 3 ft. 5/8" - 1" I.D. Thermo-Sleeve: Automotive

Same thing right?

Yup, thats the same thing, you'd be all set.. as far as your fluid, im not sure about that, but if you're upgrading the CSC, you'd be flushing your clutch fluid, I would think you'd be using a better fluid other than the oem stuff... ie. RBF600 or the Motul 5.1 which is designed to work very well with high temps.

Read T · 07-25-2015, 08:39 PM

Model 2011 Nissan 370z Sport
VIN Top Secret
Purchase date April 2012
Occurrence date July 2015
Mileage 58,000

About a year ago my clutch PEDAL broke, shearing off the helper spring mount. The pedal became very sloppy and difficult to shift but I replaced it with the RJM adjustable pedal and was very pleased with the results. Thanks to this website though I have since known to keep a close eye out for any CSC issues.

The car is my daily driver and I generally baby the car around town, although I have been to a few HPDEs with it. I currently run PFC 665 for the clutch line.Two weeks ago while changing my engine oil, I noticed that the Clutch reservoir fluid level was getting very low

. Prior to this, I had not had any problems with the clutch line and had it flushed at least once before. No puddles or leaks were noticed under the car or on the bottom of the transmission. I ordered the ZSpeed CSC and parked my car for a week (make sure you have a spare car if you own a nissan or anything British).

I am lucky enough to have a good friend that owns a shop with a lift, and today the two of us swapped out the CSC. The entire procedure took roughly 3 hours, and was made much easier by slightly dropping the front subframe to help tilt the transmission down. The clutch disc was noted to be plenty thick still - which is great since I didn't order a new one. Car is now doing great although the engagement point is slightly lower and grabbier, two things I can adjust with the RJM pedal.

Before I did the work myself I went to a Z shop locally and was quoted roughly $950 labour + parts. I ended up doing it myself with a friend for the price of the CSC and a few good beers (Dogfish Head, Aviator, and DuClaw).

As much as I love this car, I will say that I have been pretty disappointed by the build quality and random issues I've had - breaking clutch pedal, CSC failure, axle click, engine oil overheating, and clear coat bubbling off all over.

SerialCoderer · 07-25-2015, 08:57 PM

Quote:

Originally Posted by SerialCoderer

You are right! It is time I stop going to the dealer. I just need to find a reputable place now out in Jersey.

So my car came back from the dealer these are the things they claimed are needed

Part#
30205-JK40c - Cover Assy-Clutch 787.89
306A1-JK40d - Cyl Assy - Conc 183.50
12310-EY00A - Flywheel Assy 1084.32

everything with labor $3500

I do not trust they have actually figured out the problem after reading everyone else's story on here that has experienced the clutch pedal losing pressure and going to the floor. I still think my best option is to get rid of this car. I have had way to many issues (2 engines, etc, smh) with this car and I bought it fairly new 7k miles currently at 42k.

SerialCoderer · 07-25-2015, 09:02 PM

I totally agree. I am disappointed with the quality of this car. I loved my 350z. I had no major issues. The reliability of the 350 made me purchase the 370, but I have had to many major issues with this car.

Quote:

Originally Posted by Read T

Model 2011 Nissan 370z Sport
VIN Top Secret
Purchase date April 2012
Occurrence date July 2015
Mileage 58,000

About a year ago my clutch PEDAL broke, shearing off the helper spring mount. The pedal became very sloppy and difficult to shift but I replaced it with the RJM adjustable pedal and was very pleased with the results. Thanks to this website though I have since known to keep a close eye out for any CSC issues.

The car is my daily driver and I generally baby the car around town, although I have been to a few HPDEs with it. I currently run PFC 665 for the clutch line.Two weeks ago while changing my engine oil, I noticed that the Clutch reservoir fluid level was getting very low

. Prior to this, I had not had any problems with the clutch line and had it flushed at least once before. No puddles or leaks were noticed under the car or on the bottom of the transmission. I ordered the ZSpeed CSC and parked my car for a week (make sure you have a spare car if you own a nissan or anything British).

I am lucky enough to have a good friend that owns a shop with a lift, and today the two of us swapped out the CSC. The entire procedure took roughly 3 hours, and was made much easier by slightly dropping the front subframe to help tilt the transmission down. The clutch disc was noted to be plenty thick still - which is great since I didn't order a new one. Car is now doing great although the engagement point is slightly lower and grabbier, two things I can adjust with the RJM pedal.

Before I did the work myself I went to a Z shop locally and was quoted roughly $950 labour + parts. I ended up doing it myself with a friend for the price of the CSC and a few good beers (Dogfish Head, Aviator, and DuClaw).

As much as I love this car, I will say that I have been pretty disappointed by the build quality and random issues I've had - breaking clutch pedal, CSC failure, axle click, engine oil overheating, and clear coat bubbling off all over.

07-20-2015, 09:26 PM	#1067 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,830 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	I thermal wrapped the lines on my new zspeed CSC today, it looks pretty dope.. install day is this friday at AAM!!! Im stoked! __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

07-20-2015, 09:39 PM	#1068 (permalink)
firulice Enthusiast Member Join Date: Nov 2014 Location: utah Posts: 277 Drives: 40th Rep Power: 1105	What's the link for the thermal wrap? __________________ 40th-40th edition. HFC, Nismo exhaust, Stillen intakes, GTR start, UpRev

07-20-2015, 09:47 PM	#1069 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,830 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	sh1t, I'm gonna have to look it up.. standby. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

07-20-2015, 09:49 PM	#1070 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,830 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	Thermo Tec 14010 Thermo Sleeve \| eBay This is what I got, it'll run ya roughly $20, you'll use up 70% of it, if you do both lines on the CSC.. If you buy it from this seller, he's out of NY, I don't know how the hell it took 6 days shipping from NY to DC.. WI_Hedgehog likes this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

07-20-2015, 09:53 PM	#1071 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,830 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	and with that being said, I'm out... off to bed.. 0530 is gonna smack me in the face. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

07-20-2015, 10:26 PM	#1074 (permalink)
firulice Enthusiast Member Join Date: Nov 2014 Location: utah Posts: 277 Drives: 40th Rep Power: 1105	http://www.amazon.com/Thermo-Tec-140...7X986QMY14FJR7 Same thing right? __________________ 40th-40th edition. HFC, Nismo exhaust, Stillen intakes, GTR start, UpRev

07-20-2015, 10:30 PM	#1075 (permalink)
firulice Enthusiast Member Join Date: Nov 2014 Location: utah Posts: 277 Drives: 40th Rep Power: 1105	Would this work well? http://www.amazon.com/Thermo-Tec-135...CZ8FCDH702QG64 I'm thinking it should help keep my fluid from getting as hot? WI_Hedgehog likes this. __________________ 40th-40th edition. HFC, Nismo exhaust, Stillen intakes, GTR start, UpRev

07-25-2015, 08:39 PM	#1078 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 18	Model 2011 Nissan 370z Sport VIN Top Secret Purchase date April 2012 Occurrence date July 2015 Mileage 58,000 About a year ago my clutch PEDAL broke, shearing off the helper spring mount. The pedal became very sloppy and difficult to shift but I replaced it with the RJM adjustable pedal and was very pleased with the results. Thanks to this website though I have since known to keep a close eye out for any CSC issues. The car is my daily driver and I generally baby the car around town, although I have been to a few HPDEs with it. I currently run PFC 665 for the clutch line.Two weeks ago while changing my engine oil, I noticed that the Clutch reservoir fluid level was getting very low . Prior to this, I had not had any problems with the clutch line and had it flushed at least once before. No puddles or leaks were noticed under the car or on the bottom of the transmission. I ordered the ZSpeed CSC and parked my car for a week (make sure you have a spare car if you own a nissan or anything British). I am lucky enough to have a good friend that owns a shop with a lift, and today the two of us swapped out the CSC. The entire procedure took roughly 3 hours, and was made much easier by slightly dropping the front subframe to help tilt the transmission down. The clutch disc was noted to be plenty thick still - which is great since I didn't order a new one. Car is now doing great although the engagement point is slightly lower and grabbier, two things I can adjust with the RJM pedal. Before I did the work myself I went to a Z shop locally and was quoted roughly $950 labour + parts. I ended up doing it myself with a friend for the price of the CSC and a few good beers (Dogfish Head, Aviator, and DuClaw). As much as I love this car, I will say that I have been pretty disappointed by the build quality and random issues I've had - breaking clutch pedal, CSC failure, axle click, engine oil overheating, and clear coat bubbling off all over. onzedge, SerialCoderer, Smashley and 2 others like this. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 07:35 AM
Sticky: 370Z Transmission Failures (6MT)	DIGItonium	Engine & Drivetrain	104	02-25-2021 10:19 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 08:10 AM
CSC Acting UP? Sticky Clutch captured on video.. help?	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-23-2011 09:33 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 07:03 AM