Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

slippery4678

$2300 for the whole clutch assembly.

__________________
Stillen CBE | Berk HFC's | Intake Plenum | AAM UpRev Tune | Swift Spec-R Springs | H&R 15/20 Spacers | 265/285's | Stillen Sways | 20% tint

Shutterjock

I suggest ensuring these folks call the regional NISSAN office(s) for confirmation of the fix. This issue has been around long enough and, as of last Spring when it happened to me, the fix was much simpler -- assuming swapping out the Master Cylinder AND slave is simple in comparison.

I am not a pro-mechanic, so my terminology may be off a bit; yet I'm quite certain the regional office told the folks down here in New Orleans to pop out both parts and replace.

No issues since.

Sounds like overkill on their part if they're talking about replacing the entire clutch assembly. Again, I'm not a mechanic so take what I'm offering with a grain of salt (so to speak). I'm assuming the "entire clutch assembly" means a bit more than what I mentioned above. Good luck!

__________________
Shutterjock
Z Photographer
http://www.shutterjock.com
"No Matter Where I Go, There I Am"