HKS Oil Cooler

///M-Power · 08-07-2010, 11:40 AM

I don't see any reason as to why you should wait for "break-in" to be over to install your oil cooler. It also isn't necessary to get a branded (read: expensive) HKS oil cooler. I did mine with a respectable brand like B&M oil cooler and the entire installation cost me less than P20k.

I asked Titaw of Titan Works to fabricate the mounts and lines for me. Call him at 4133911, he can surely help you with your oil cooler install. I'm very satisfied with Titan's work. I'm guessing the HKS will cost you 50 to 100k for everything?

While you are at it, do a differential oil change as well. Don't bother changing your manual transmission oil (assuming you have MT) since it really isn't necessary, IMO.

BTW, the B&M oil cooler and OBX sandwich plate was ordered by my friend online and shipped to Manila. You can ask Titaw what brands he carries but I'm sure a typical 200SX oil cooler set-up will work for the Z.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 06:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 03:27 PM
STILLEN oil cooler kit + STILLEN power steering cooler = fit?	ZBW39	STILLEN	2	07-02-2010 02:08 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 07:32 PM
HKS Oil Cooler	370Ztune	Engine & Drivetrain	0	07-10-2009 02:19 PM

08-07-2010, 11:40 AM	#2 (permalink)
///M-Power Base Member Join Date: May 2009 Location: Philippines Posts: 9 Drives: 370Z Touring w/ SP Rep Power: 18	I don't see any reason as to why you should wait for "break-in" to be over to install your oil cooler. It also isn't necessary to get a branded (read: expensive) HKS oil cooler. I did mine with a respectable brand like B&M oil cooler and the entire installation cost me less than P20k. I asked Titaw of Titan Works to fabricate the mounts and lines for me. Call him at 4133911, he can surely help you with your oil cooler install. I'm very satisfied with Titan's work. I'm guessing the HKS will cost you 50 to 100k for everything? While you are at it, do a differential oil change as well. Don't bother changing your manual transmission oil (assuming you have MT) since it really isn't necessary, IMO. BTW, the B&M oil cooler and OBX sandwich plate was ordered by my friend online and shipped to Manila. You can ask Titaw what brands he carries but I'm sure a typical 200SX oil cooler set-up will work for the Z.