![]() |
I have no duct work done. I have not had any overheating troubles in the past until starting longer events. I am here asking questions before I go do it
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#1 (permalink) |
Base Member
Join Date: Mar 2013
Location: mn
Posts: 224
Drives: 09 black mt
Rep Power: 3368 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I have no duct work done. I have not had any overheating troubles in the past until starting longer events. I am here asking questions before I go do it all which is why I made the post. My oil cooler sits way off in front of my driver side fender liner and looks like it’s common for people to toss a spal fan directly on it. Again, checking my options. I have seen nothing good on here about our radiator options all I see is stay stock. I am throwing a fast intentions tow bar on the front this next week to give me a little more room in front of my front mount.
|
![]() |
![]() |
![]() |
#2 (permalink) | |
A True Z Fanatic
Join Date: Apr 2013
Location: st. petersburg
Posts: 5,727
Drives: 09 nissan 370z Sp M6
Rep Power: 295379 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
|
|
![]() |
![]() |
![]() |
#3 (permalink) |
Base Member
Join Date: Mar 2013
Location: mn
Posts: 224
Drives: 09 black mt
Rep Power: 3368 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I have been fortunate enough for Jonathan’s help in the past and actually messaged him the other night about this. Now that I’m getting used to the car sc’’d I’m pushing it much harder than the spring time..” new to this year” I had some fast cars I was tossed in with so I was pushing mine hard to hang with them. “Just a practice event open course 20 min runs “ I have never went into limp mode or anything but this setup is pretty new to me I did a lot of changes at once with forced induction. Now it’s onto the next but i need more than a minimal upgrade for this. Jonathan knows my issue I figured ducting is where our discussion will go. I’m grabbing a few things right away the certainly won’t hurt
|
![]() |
![]() |
![]() |
#4 (permalink) |
Base Member
Join Date: Mar 2013
Location: mn
Posts: 224
Drives: 09 black mt
Rep Power: 3368 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Thanks a TON this is what I was looking for. I am running an 09 that I have had for 10 years and that’s why I was looking at new radiators before this. Since my coolant system isn’t pressurized the greddy breather is a great idea. The greddy oil pan was my other part I was looking at for an actual extra quart of oil to be added in with the aluminum pan. I was just curious on the fan upgrade since I’ll be ripping it down to this point it wouldn’t be difficult to do. To build a shroud similar to the old gtm wouldn’t be that difficult. Just getting all my ducks in a row to do this all at once. I have never ran anything like water wetter etc so I picked some up. My next event isn’t for 3 weeks..last year this event was in the low 40s….not upper 90s.
Last edited by weebs25; 09-02-2023 at 08:57 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radiator fans not spinning at all | brandad_1 | Engine & Drivetrain | 1 | 08-08-2022 01:59 PM |
Radiator fans Not working properly | Daniel370 | Engine & Drivetrain | 1 | 08-05-2022 03:34 AM |
upgrade stock fans while doing the radiator? | bimbimbop | Forced Induction | 12 | 08-23-2018 06:05 AM |
Need some help...radiator fans | spearfish25 | Nissan 370Z General Discussions | 8 | 01-18-2011 09:09 PM |