is there supposed to be a metal connector to the wires leading to ECM?

Snusk · 01-22-2023, 03:41 AM

Dreadnaught · 01-22-2023, 01:30 PM

Looks like that is just a blank port to me. If a connector was supposed to go in there it should have the female end where it's blank.

Snusk · 01-22-2023, 08:42 PM

Thank you for the reply but I noticed that there are supposed to be the other pins going over there

filip00 · 01-23-2023, 02:56 AM

I wouldn't bet on it. As I was installing some wires through the door connector, I noticed the connector also didn't have all wires/pins in it. There isn't anything else that could go through that connector for the Z, so I'm suspecting that Nissan recycles some of these connectors between different models, and for some you need extra functions, for some you don't. Thereby meaning that sometimes not all pins are used in the connector.

With that in mind, I would suspect it's all normal in your case.

SonicVQ · 02-14-2023, 07:21 AM

That is pin 26 on the VVEL control module and that is how they are.
You have nothing to worry about!

01-22-2023, 03:41 AM	#1 (permalink)
Snusk Base Member Join Date: Dec 2021 Location: Oahu Posts: 22 Drives: 09 Nissan 370z 6sp Rep Power: 3	is there supposed to be a metal connector to the wires leading to ECM?

01-22-2023, 01:30 PM	#2 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10139	Looks like that is just a blank port to me. If a connector was supposed to go in there it should have the female end where it's blank. __________________ Ford Diesel and Heavy Line Technician at your service.

01-23-2023, 02:56 AM	#4 (permalink)
filip00 Enthusiast Member Join Date: May 2021 Location: slovenia Posts: 480 Drives: 370z pack Rep Power: 105292	I wouldn't bet on it. As I was installing some wires through the door connector, I noticed the connector also didn't have all wires/pins in it. There isn't anything else that could go through that connector for the Z, so I'm suspecting that Nissan recycles some of these connectors between different models, and for some you need extra functions, for some you don't. Thereby meaning that sometimes not all pins are used in the connector. With that in mind, I would suspect it's all normal in your case. Rusty, Optimiser and sx moneypit like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Throwing a p1606 code, is there supposed to be another metal connector on bottom left	Snusk	Engine & Drivetrain	0	10-11-2022 10:20 PM
Kami Speeds ENGINE\|DRIVETRAIN\|COOLING SHOP Industry Leading Customer Service!!	KamiSpeed	Drivetrain/Engine	156	06-24-2016 05:12 PM
MPTCC Championship Leading Driver Needs A Car!	M.Bonanni	Track / Autocross / Drifting / Dragstrip	0	10-03-2011 01:32 PM

01-22-2023, 08:42 PM	#3 (permalink)
Snusk Base Member Join Date: Dec 2021 Location: Oahu Posts: 22 Drives: 09 Nissan 370z 6sp Rep Power: 3	Thank you for the reply but I noticed that there are supposed to be the other pins going over there

02-14-2023, 07:21 AM	#5 (permalink)
SonicVQ Base Member Join Date: Jan 2016 Location: Ontario Posts: 230 Drives: G37 Sport Rep Power: 6720	That is pin 26 on the VVEL control module and that is how they are. You have nothing to worry about!