09-19-2022, 01:37 PM
|
#19 (permalink)
|
|
Base Member
Join Date: Nov 2021
Location: TX
Posts: 4
Drives: 17 Nissan 370z Sport
Rep Power: 3359
|
Quote:
Originally Posted by vtec to vvel
Good info! No detail too small and every detail is paramount for this process I'm sure, and really appreciate you taking the time and responding.
I also stumbled upon the following thread, so I am assuming don't crank the engine? lol
Engine cranked backwards by hand won’t start |
I saw that thread as well. When I removed the Flywheel I just used the two bolts and a wrench trick. Thread a transmission bolt back to its original hole by hand. Thread an original pressure plate bolt back in. Place a wrench in between both bolts so that when you try and loosen the flywheel bolts the flywheel doesn't move. I also used the trick to tighten the flywheel bolts as well. The flywheel moved on a me a few times but I did not have the "won't crank issue" stated in the thread above.
|
|
|
43Likes
Threaded Mode
