Engine Swap info

CCARTIER · 07-25-2021, 02:34 PM

I own a 2009 370z and was told I through a rod and need a replacement engine. I found one for $1,300 and was wondering if anyone knew a reliable shop in Charlotte NC that can put it in? Also any ideas on what to do with the old engine once it's removed? And lastly any pitfalls I should be conscious of having a used engine replacement. Thanks in advance.

SouthArk370Z · 07-25-2021, 02:48 PM

Quote:

Originally Posted by CCARTIER

... Also any ideas on what to do with the old engine once it's removed? ...

The block is ruined but you should be able to salvage any parts that weren't mangled in the mishap. Ie, heads, manifolds, VVEL. Keep 'em or sell 'em.

LMBmikeZ · 08-03-2021, 07:57 AM

I am in the same boat.... should be bringing my mess home this week to start the disassembly.

JARblue · 08-03-2021, 08:44 AM

Quote:

Originally Posted by LMBmikeZ

I am in the same boat.... should be bringing my mess home this week to start the disassembly.

Hey stranger

Good luck with the repairs!

Spooler · 08-03-2021, 08:54 AM

SOHO is a shop near you in Monroe, NC. They do quality work. Not sure how good a motor you got for only $1300. Good low mileage ones normally go for $2000 to $2500.

redondoaveb · 08-03-2021, 09:08 AM

Quote:

Originally Posted by Spooler

SOHO is a shop near you in Monroe, NC. They do quality work. Not sure how good a motor you got for only $1300. Good low mileage ones normally go for $2000 to $2500.

I bought one of my spares for $1400. I had the seller do a video of a leakdown test and send over live results of each cylinder as we were messaging. I then did both compression and leakdown tests when I received the motor and all cylinders tested perfect. Its suppose to be a 30,000 mile motor but I have no way to verify that.

Spooler · 08-03-2021, 02:27 PM

Quote:

Originally Posted by redondoaveb

I bought one of my spares for $1400. I had the seller do a video of a leakdown test and send over live results of each cylinder as we were messaging. I then did both compression and leakdown tests when I received the motor and all cylinders tested perfect. Its suppose to be a 30,000 mile motor but I have no way to verify that.

We are not so lucky on the East coast.

redondoaveb · 08-03-2021, 02:50 PM

Quote:

Originally Posted by Spooler

We are not so lucky on the East coast.

My motor came from Nebraska. I actually paid $900 for it. The rest was trucking fees.

CCARTIER · 08-07-2021, 08:08 AM

Thanks everyone. I didn't pull the trigger on that motor. A mechanic I know didn't have good things to say about the company. I found JDM Engine in Charlotte which found the engine at JDM in Tenn for $2,200 w/50-55k mile but it's from Japan. Anyone have any insight on if JDM engines from Japan are a good look? Any experience with this company?

Evildky · 08-07-2021, 05:59 PM

Quote:

Originally Posted by CCARTIER

Thanks everyone. I didn't pull the trigger on that motor. A mechanic I know didn't have good things to say about the company. I found JDM Engine in Charlotte which found the engine at JDM in Tenn for $2,200 w/50-55k mile but it's from Japan. Anyone have any insight on if JDM engines from Japan are a good look? Any experience with this company?

Unless it comes with a cluster it’s miles unknown, condition unknown. I’ve been down this path, a motor on a pallet is an unknown regardless of what a seller tells you. I had one “low miles JDM engine” turned out had oversized bearings in it. Had another with a cracked valve seat and scored bearings. Unless you blew a hole in your block you might be better off rebuilding what you have. Also with the age and availability of these engines I’d take a US market car that you can see “was running when it hit” over an engine with an unverifiable history.

CCARTIER · 08-16-2021, 09:12 AM

Thanks Evildky, I found 2010 convertible hit in the rear engine still in the car with 81k I pulled the trigger on. I also bought a LUX dual mass flywheel and new clutch. Master and slave cylinders were upgraded prior to blown engine so I'm good there. But can anyone recommend anything else to replace while the engine is being swapped to avoid high cost of labor later on? Also my car a had a tune, does that need to be or should it be erased when engine is swapped out?

Thanks in advance!

JARblue · 08-16-2021, 10:04 AM

Gallery gaskets (get EPS kit), thermostat, water pump are good preventative maintenance items

07-25-2021, 02:34 PM	#1 (permalink)
CCARTIER Base Member Join Date: Sep 2014 Location: NORTH CAROLINA Posts: 11 Drives: 2009 370Z GREY M6 Rep Power: 10	Engine Swap info I own a 2009 370z and was told I through a rod and need a replacement engine. I found one for $1,300 and was wondering if anyone knew a reliable shop in Charlotte NC that can put it in? Also any ideas on what to do with the old engine once it's removed? And lastly any pitfalls I should be conscious of having a used engine replacement. Thanks in advance.

08-03-2021, 07:57 AM	#3 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	I am in the same boat.... should be bringing my mess home this week to start the disassembly. JARblue likes this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

08-07-2021, 08:08 AM	#9 (permalink)
CCARTIER Base Member Join Date: Sep 2014 Location: NORTH CAROLINA Posts: 11 Drives: 2009 370Z GREY M6 Rep Power: 10	Update Thanks everyone. I didn't pull the trigger on that motor. A mechanic I know didn't have good things to say about the company. I found JDM Engine in Charlotte which found the engine at JDM in Tenn for $2,200 w/50-55k mile but it's from Japan. Anyone have any insight on if JDM engines from Japan are a good look? Any experience with this company?

08-16-2021, 10:04 AM	#12 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Gallery gaskets (get EPS kit), thermostat, water pump are good preventative maintenance items Ghostvette, sx moneypit and redondoaveb like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-03-2021, 08:54 AM	#5 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,502 Drives: 2013 Nismo 370z Rep Power: 2684391	SOHO is a shop near you in Monroe, NC. They do quality work. Not sure how good a motor you got for only $1300. Good low mileage ones normally go for $2000 to $2500.

08-16-2021, 09:12 AM	#11 (permalink)
CCARTIER Base Member Join Date: Sep 2014 Location: NORTH CAROLINA Posts: 11 Drives: 2009 370Z GREY M6 Rep Power: 10	Thanks Evildky, I found 2010 convertible hit in the rear engine still in the car with 81k I pulled the trigger on. I also bought a LUX dual mass flywheel and new clutch. Master and slave cylinders were upgraded prior to blown engine so I'm good there. But can anyone recommend anything else to replace while the engine is being swapped to avoid high cost of labor later on? Also my car a had a tune, does that need to be or should it be erased when engine is swapped out? Thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine swap	370z TT	Engine & Drivetrain	30	12-26-2016 12:11 PM
Engine Swap	370z nismo 1	Nismo 370Z	6	09-25-2016 01:52 PM
Little more info on the Infiniti VR engine	falconfixer	Other Vehicles	84	01-14-2016 11:03 AM
Swap my old engine to brand new engine... mod the car right away or not?	khsysh	Nissan 370Z General Discussions	15	05-30-2013 05:12 PM
370z with gtr engine swap. Has anyone done this yet?	370ZRR	Nissan 370Z General Discussions	34	04-24-2013 10:57 AM