|
Originally Posted by SonicVQ The condenser is difficult to find as it is taped to the wiring harness that is under the upper intake. This is what it looks like:
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-30-2020, 06:37 AM
|
#21 (permalink) | |
|
Base Member
Join Date: Aug 2019
Location: Czech Republic
Posts: 17
Drives: 09 370Z 7AT
Rep Power: 7  |
Quote:
Thank you!!!! Little progress: I tried osciloscope today. On cylinders which are OK, there is 5-6V signal on signal wire on coils. On fourth cylinder, there si similar signal, but only 2-2,5V. Wire from ECM to coil plug seems to be OK (checked with multimeter). I really hoped, that problem is caused by bad wire, but It kinda looks like ECM problem  Should I try to change signal wire from ECM to coil? According to my uncle (electrician) wire is 99% OK. |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Multiple Cylinder Misfire P0300 | dreamer27 | Engine & Drivetrain | 36 | 02-27-2020 01:23 PM |
| Cylinder 5 Misfire | elhombre | Engine & Drivetrain | 2 | 10-08-2017 12:58 PM |
| Under power and cylinder 5 misfire | Rob298mx | Forced Induction | 1 | 06-30-2016 06:37 AM |
| Check Engine Light Error Code P0300 multiple cylinder misfire. | reynald3616 | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 4 | 12-15-2015 06:17 AM |
| Random Cylinder Misfire with CAI/Short Ram Intake | foodgoesNryan | Intake/Exhaust | 4 | 12-10-2014 12:05 PM |
10Likes
Threaded Mode
