Clutch Bleed Screw

Herb Hoover · 10-06-2018, 02:23 PM

So I seem to run into a bit of an issue. My clutch recently started feeling very unresponsive. First thought was possible CSC failure, but decided to bleed the line just in case it was just air. When rightening the bleed screw, the end broke off. I believe I found a replacement screw but I cant seem to get the broken one out. I have tried using a screw extractor and now that is stuck in the middle of the original broken screw and will not come out or remove the old screw. Any ideas?

DOOMMONKEY777 · 10-06-2018, 05:53 PM

Ok, with csc in the Z once it started to give u a problem of "unresponsive" you have to change the whole csc unit its done, in this situation you chould just replase the overweighted flywheel, crappy clutch n csc alltogether.

There are great csc clutch n flywheel combo kits out there online, but for about $1000 you can buy new or used from a forum members selling things here on the forum. Gl.

Spooler · 10-06-2018, 06:11 PM

Sounds like you will be installing a new CSC of some type.

gomer_110 · 10-06-2018, 06:30 PM

Quote:

Originally Posted by Spooler

Sounds like you will be installing a new ZSpeed CMAK CSC of some type.

Ftfy

Herb Hoover · 10-06-2018, 10:38 PM

Quote:

Originally Posted by DOOMMONKEY777

Ok, with csc in the Z once it started to give u a problem of "unresponsive" you have to change the whole csc unit its done, in this situation you chould just replase the overweighted flywheel, crappy clutch n csc alltogether.

There are great csc clutch n flywheel combo kits out there online, but for about $1000 you can buy new or used from a forum members selling things here on the forum. Gl.

So when I purchased the car, some new no name brand clutch and lightweight flywheel were installed just prior. I believe it is an aftermarket OEM replacement. At this point, couldn't I just replace the CSC?

10-06-2018, 02:23 PM	#1 (permalink)
Herb Hoover Base Member Join Date: Aug 2018 Location: Little Falls, NJ Posts: 42 Drives: 11' 370Z MB MT Rep Power: 7	Clutch Bleed Screw So I seem to run into a bit of an issue. My clutch recently started feeling very unresponsive. First thought was possible CSC failure, but decided to bleed the line just in case it was just air. When rightening the bleed screw, the end broke off. I believe I found a replacement screw but I cant seem to get the broken one out. I have tried using a screw extractor and now that is stuck in the middle of the original broken screw and will not come out or remove the old screw. Any ideas?

10-06-2018, 05:53 PM	#2 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Sep 2010 Location: Crooklyn Posts: 1,013 Drives: 370Z 6psd-sport-pkg Rep Power: 21	Ok, with csc in the Z once it started to give u a problem of "unresponsive" you have to change the whole csc unit its done, in this situation you chould just replase the overweighted flywheel, crappy clutch n csc alltogether. There are great csc clutch n flywheel combo kits out there online, but for about $1000 you can buy new or used from a forum members selling things here on the forum. Gl. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Searching for bleed valve/screw	mishuko	Canada	2	04-14-2016 09:41 PM
Clutch bleed	Merv	Brakes & Suspension	4	05-12-2015 02:51 PM
How soon to bleed clutch?	JCarter	Engine & Drivetrain	8	04-28-2014 07:05 PM
Clutch won't bleed properly	spearfish25	Engine & Drivetrain	8	04-25-2012 09:25 AM
Anyone bleed the clutch hydraulics?	DIGItonium	Engine & Drivetrain	11	12-25-2009 08:33 PM

10-06-2018, 06:11 PM	#3 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,117 Drives: 2013 Nismo 370z Rep Power: 2684394	Sounds like you will be installing a new CSC of some type.