RJM Clutch Master Cylinder Kit?

nandosman

Thanks for the help guys, I just bought my pedal from RJM. Hopefully nothing will go wrong with my CMC or CSC, until I replace them with aftermarket.

__________________
FI Non-Res Test Pipes | FI 18" Res CBE | Stillen Gen 3 CAI | Dynotuned @ Dynosty EcuTek 325 whp

370zBLAST

How many miles on your 370z

Sent from my Pixel 2 XL using Tapatalk

nandosman

2014, 45k miles

__________________
FI Non-Res Test Pipes | FI 18" Res CBE | Stillen Gen 3 CAI | Dynotuned @ Dynosty EcuTek 325 whp

370zBLAST

Your still on a stock cmc? Mine went exactly a 30k. Which is why i upgraded my CMC.

Sent from my Pixel 2 XL using Tapatalk

Quicksilvers

From what I have seen it depends on how you use your Z. The symptoms if your CSCEK is out of adjustment it will become tough to get into first gear and your clutch will not depress completely and when you do get it in gear your Z will move forward even with the clutch depressed. Eventually it will fail though. If your Z does display the symptoms wait until your Z is cold and check your fluid to see where the fluid level is at and if you have fluid leaking under your Z.Also you may need to bleed the whole system. The Z1 CSCEK is known for going out of adjustment quite often. You can replace it or deal with it going out of adjustment all the time. I agree that the Z Speed Performance CMAK is the best choice.