Anyone running RJM pedal?

fork · 04-24-2018, 09:57 PM

Received mine today and just put it in and can confirm that it does make an improvement on the stock Exedy clutch. I admit that I was skeptical that this pedal would be an improvement. I thought that the stock clutch felt pretty good on it's own. But the RJM pedal feels a lot lighter than the stock and has a much smoother engagement as well.

The install is cramped under the dash but the instructions are clear and detailed and that helps make installation as easy as it can be.

My only concern after the installation and test drive is that the first 1/2" of clutch pedal movement feels soft like there is no resistance. I ordered the HD clevis and had taken up the master cylinder clevis slack just as specified in the instructions. There is no more slack to take because the MC is moving during that first 1/2". It is a very comfortable, linear feel after that point but it just doesn't have a good feel when you first put in the clutch or when you are coming off of it. I am planning on contacting RJM and see if they have anything to say about it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adjustments to RJM V2 Pedal	Z34VQ	Northern California Region	0	11-24-2016 02:48 AM
gas pedal	midn8t	DIY Section (Do-It-Yourself)	8	05-19-2016 01:58 PM
For those running the LED daytime running lights	Ni55anPat	Exterior & Interior	0	05-04-2015 03:00 PM
Pedal Box	Zed-Hed	Tuning	1	12-11-2013 09:12 PM

04-24-2018, 09:57 PM	#1 (permalink)
fork Base Member Join Date: Sep 2017 Location: Pittsburgh Posts: 49 Drives: 18 370 ST Blue Pearl Rep Power: 9	Received mine today and just put it in and can confirm that it does make an improvement on the stock Exedy clutch. I admit that I was skeptical that this pedal would be an improvement. I thought that the stock clutch felt pretty good on it's own. But the RJM pedal feels a lot lighter than the stock and has a much smoother engagement as well. The install is cramped under the dash but the instructions are clear and detailed and that helps make installation as easy as it can be. My only concern after the installation and test drive is that the first 1/2" of clutch pedal movement feels soft like there is no resistance. I ordered the HD clevis and had taken up the master cylinder clevis slack just as specified in the instructions. There is no more slack to take because the MC is moving during that first 1/2". It is a very comfortable, linear feel after that point but it just doesn't have a good feel when you first put in the clutch or when you are coming off of it. I am planning on contacting RJM and see if they have anything to say about it.