Nissan 370Z Forum
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Oil Catch Cans... (http://www.the370z.com/engine-drivetrain/125498-oil-catch-cans.html)

Jayhovah 02-15-2018 09:08 AM
Quote:
Originally Posted by nandosman (Post 3730643)
It was warm today, so I got the chance to install them, here's some pics:
That looks great! Where did you get those fittings?

nandosman 02-15-2018 01:55 PM
Quote:
Originally Posted by Jayhovah (Post 3730721)
That looks great! Where did you get those fittings?
Those are exactly the same ones you posted from Grainger, I just sprayed them with black paint.

Jayhovah 02-15-2018 02:01 PM
Quote:
Originally Posted by nandosman (Post 3730839)
Those are exactly the same ones you posted from Grainger, I just sprayed them with black paint.
LOL gotcha =) Looks clean! hope mine turns out as nice.

Baronsmokes 02-15-2018 07:45 PM
Catch Can
 
1 Attachment(s)
Quote:
Originally Posted by Maybe2wice (Post 3723715)
Looking for a Oil Catch can for my Stillen Supercharged 370z. Finding that oil Blow by is becoming an issue with my MAFS / Throttle Bodies. P010B is the code. Changed out Mafs and notice the oil slightly dripping. Any suggestions to a decent Can????
Just got my catch can today.

EliteXpress 03-18-2018 05:54 PM
1 Attachment(s)
I know the Mishimoto'$ were more expensive but just didn't feel like fooling with the extra ports, very simple install.

Jayhovah 03-19-2018 09:05 AM
Quote:
Originally Posted by EliteXpress (Post 3739654)
I know the Mishimoto'$ were more expensive but just didn't feel like fooling with the extra ports, very simple install.
Looks great.. I also would have preferred the 2-port but I can't stand the idea of giving Mishimoto money... particularly since they are just badging a generic product but telling the world they "engineered" it.

nandosman 05-15-2018 05:12 PM
Flushed my oil cans today, after 1000 miles of installation, with my oil change:

https://i.imgur.com/870I6Un.jpg

The picture is from the driver side. Passenger side was practically empty. I feel like this is a lot of oil from only 1000 miles.

Baronsmokes 05-15-2018 09:01 PM
1 Attachment(s)
Quote:
Originally Posted by Baronsmokes (Post 3730933)
Just got my catch can today.
Excuse to show catch can.After 2nd atempt at powder coat.

Jayhovah 08-12-2018 12:46 PM
3 Attachment(s)
well it only took like 7 months, but I finally got around to installing my catch cans... Please excuse my filthy engine compartment.

Won't get to test drive for a while unfortunately... Right now my car is stranded in the garage as they are redoing my driveway... should be done Monday or Tuesday but I'm traveling all week for work anyway.

http://www.the370z.com/attachment.ph...1&d=1534095838

http://www.the370z.com/attachment.ph...1&d=1534095838

http://www.the370z.com/attachment.ph...1&d=1534095842

DIGItonium 08-13-2018 10:48 AM
All of you guys with the Mishimoto or similar catch cans... excellent choice. I had them installed before selling the car.

Huge lesson learned was when I initially purchased the cheap GodSpeed universal catch cans - vacuum leaks galore! I tried using epoxy to seal it up however I could, but still heard the hissing noise. Next huge lesson learned was silicone vacuum lines for PCV routing. The lines would "sweat" oil, get soft, and break at the clamps causing idle to jump all over the place.

sizziano 08-13-2018 12:30 PM
Just FYI for anyone considering the Mishimoto catch can kit. The can bracket will not fit on 2018 370s. Not sure about 17s but Nissan changed the design of the expansion tank for some reason.

jdinh701 10-28-2018 01:02 AM
what size diameter hose is the generic Mishimoto amazon can and also the crack case end? are they the same hose diameter size?

jdinh701 10-29-2018 01:00 AM
Also what is a good hose material to re place with?

Sent from my SM-G950U using Tapatalk

BettyZ 10-29-2018 07:20 AM
Quote:
Originally Posted by jdinh701 (Post 3795452)
Also what is a good hose material to re place with?

Sent from my SM-G950U using Tapatalk
I used braided SS lines for bling factor. -8AN I believe.

Sent from my SM-G955U using Tapatalk

BettyZ 10-29-2018 07:21 AM
Quote:
Originally Posted by jdinh701 (Post 3795298)
what size diameter hose is the generic Mishimoto amazon can and also the crack case end? are they the same hose diameter size?
They are both 3/8 mas o menos.

Sent from my SM-G955U using Tapatalk


All times are GMT -5. The time now is 01:20 PM.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2