Intake manifold idle jump helpp

jorgeeeZ34 · 06-29-2017, 04:48 PM

I just finished my z1 intake plenum manifold, and inset everything back up and when i turn on the car it just keeps reving itself. I unplugged the abttery and still. It keeps reving to 2.5k-3k. And drops then redoes it. Anyone can help?

I think maybe the throttle bodies are on to tight?

Rusty · 06-29-2017, 08:49 PM

Double check the wiring and hoses. Something is crossed.

Dreadnaught · 06-29-2017, 10:21 PM

Check to make sure all of your vacuum and fresh air lines are connected. I would start there.

Also, did you make sure to reinstall the intake gasket and throttle body gaskets?

jorgeeeZ34 · 06-30-2017, 12:37 AM

Yea i solved it, it was the nissan engine cover has a bolt in the middle thati i thought was just to hold the cover but its a vacuum seal and that was what was causing the idke problem i has to undo the whole manifold twice for such a dunb issue that was right in my face

Thanks guys

06-29-2017, 04:48 PM	#1 (permalink)
jorgeeeZ34 Base Member Join Date: Nov 2016 Location: Miami Posts: 4 Drives: 2014 6mt Gray base Rep Power: 8	Intake manifold idle jump helpp I just finished my z1 intake plenum manifold, and inset everything back up and when i turn on the car it just keeps reving itself. I unplugged the abttery and still. It keeps reving to 2.5k-3k. And drops then redoes it. Anyone can help? I think maybe the throttle bodies are on to tight?

06-29-2017, 08:49 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,884 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Double check the wiring and hoses. Something is crossed. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-29-2017, 10:21 PM	#3 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10139	Check to make sure all of your vacuum and fresh air lines are connected. I would start there. Also, did you make sure to reinstall the intake gasket and throttle body gaskets? __________________ Ford Diesel and Heavy Line Technician at your service.

06-30-2017, 12:37 AM	#4 (permalink)
jorgeeeZ34 Base Member Join Date: Nov 2016 Location: Miami Posts: 4 Drives: 2014 6mt Gray base Rep Power: 8	Solved Yea i solved it, it was the nissan engine cover has a bolt in the middle thati i thought was just to hold the cover but its a vacuum seal and that was what was causing the idke problem i has to undo the whole manifold twice for such a dunb issue that was right in my face Thanks guys wideglideleon and zzzzz370zzzzz like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] (BNIB) OEM Intake Manifold Gaskets///Exhaust Manifold Gaskets	BlkNismo	Parts for sale (Private Classifieds)	19	08-13-2016 12:01 PM
selling used stillen G3 intake.Motordyne M370 Intake Manifold	01206	Canada	4	04-14-2016 01:31 AM
intake plenum vs intake manifold?	louiey370z	Engine & Drivetrain	5	01-07-2016 09:49 AM
Intake manifold	Elmo370z	Intake/Exhaust	5	08-04-2015 12:50 PM
intake cams advanced at idle	juld0zer	Engine & Drivetrain	0	09-02-2014 07:34 PM