|
I prime the oil system to build pressure before letting it start after adding an oil cooler or opening oil cooler lines. I either disconnect the injector harness or unplug
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-24-2017, 10:40 PM
|
#12 (permalink) |
|
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974724   |
I prime the oil system to build pressure before letting it start after adding an oil cooler or opening oil cooler lines. I either disconnect the injector harness or unplug the fuel pump and make sure there is no fuel pressure in the system then crank it until the pressure light turns off. Of course I also pour in whatever oil I can get the cooler to take before making the hose connections.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Install location of Stillen SC cooler AND Stillen Oil cooler AND ps cooler | imazman | Forced Induction | 7 | 12-18-2016 03:15 PM |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Oil cooler, oil change | Daishi9000 | DIY Section (Do-It-Yourself) | 33 | 02-15-2013 01:06 PM |
| Clearing oil cooler @ change time w/ compressed air? | MattP725 | Engine & Drivetrain | 14 | 08-30-2011 12:59 PM |
| Oil change with oil cooler | TARDCORE | Engine & Drivetrain | 11 | 01-20-2010 12:30 PM |
3Likes
Threaded Mode
