Need help with my 370z

drentooth · 02-10-2017, 10:58 PM

Quote:

Originally Posted by Kaizer_Sosay

Yea, follow what BC and Sgt said. Out of warranty, stay away from the dealer. Any reputable mechanic shop in your area can hook up the OBD scanner to read the codes and let you know what they are.

I got 3 years warranty on the car and I just got it a month ago. So I should be fine to bring this to Nissan dealership right

drentooth · 02-10-2017, 10:59 PM

Quote:

Originally Posted by kenchan

Please describe stop and go motion in more detail with simulated sound

actually the stop and go motion happens whenever I reach 2,500 rpm. Kinda like the Car is about to run out of gas but my tank has plenty

YzGyz · 02-11-2017, 01:47 AM

Dude, if it's under warranty bring it to the dealer.

YzGyz

Kaizer_Sosay · 02-11-2017, 09:57 AM

Quote:

Originally Posted by drentooth

I got 3 years warranty on the car and I just got it a month ago. So I should be fine to bring this to Nissan dealership right

If that is the case then absolutely bring it to the dealer. Was under the impression you were out of warranty for some reason. But is it a factory warranty from Nissan or an extended type of warranty purchased through the used car dealer (non nissan) that you may have purchased the car from ?

kenchan · 02-11-2017, 10:36 AM

Quote:

Originally Posted by drentooth

actually the stop and go motion happens whenever I reach 2,500 rpm. Kinda like the Car is about to run out of gas but my tank has plenty

dat is called limp mode.

Datsun Z · 02-11-2017, 01:13 PM

Drentooth, is your car manual or automatic? Also What was your oil temperature at the time this happened?

jaedub · 02-11-2017, 04:47 PM

My guess is one of the sensors have gone bad. I doubt its something major. Check with your dealer since you have warranty.

jaedub · 02-11-2017, 04:48 PM

Quote:

Originally Posted by kenchan

dat is called limp mode.

I thought limp mode caps you at 3.5k RPM

Ghost116 · 02-12-2017, 07:09 PM

Have warranty=use warranty.... use it as much as u can as often as u can

B&W_Evader · 02-13-2017, 09:21 AM

Drive it with VDC off. If it still does it then do what they say above. If it goes away, you're getting some wheel slip and VDC is kicking in. Lighten up on your foot and drive with a little more finesse. You can use the VDC indicator to see how far you need to lighten off. Once you get the balance worked out, turn the VDC off again and see how much further you can push it before the car comes loose. BTW, do your driving development at your own risk. Many people wreck while developing performance driving skills.

B&W_Evader · 02-13-2017, 09:31 AM

One other thing you can check... Lift up the rear and look at your half shafts. Make sure the sprocket for your half shaft sensors isn't caked with crud. They can be dirty, but should not have any chunks of crud on them. These sensors tell the computer how fast each shaft is spinning if the difference is too great, it will apply brakes to the one that's spinning too fast.

Ghostvette · 02-13-2017, 03:27 PM

Hmmmmmmm

1)Has warranty........ Use the warranty......
2)There are other speeds that 'foot to the floor'........
3)Road Atlanta.... get a helmet

Reputable shop in the Atlanta area: Z1. You will just have to drive like a grandma to get there....

Wilson2608 · 02-14-2017, 01:57 PM

Quote:

Originally Posted by jaedub

I thought limp mode caps you at 3.5k RPM

I've had limp mode that won't let me go past 1100 rpm

02-11-2017, 01:47 AM	#18 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 62	Dude, if it's under warranty bring it to the dealer. YzGyz DYNAZOR and Wilson2608 like this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

02-11-2017, 01:13 PM	#21 (permalink)
Datsun Z Base Member Join Date: Jan 2015 Location: Melbourne Australia Posts: 18 Drives: 09 370Z Rep Power: 10	Drentooth, is your car manual or automatic? Also What was your oil temperature at the time this happened? Last edited by Datsun Z; 02-11-2017 at 01:19 PM.

02-12-2017, 07:09 PM	#24 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 366	Have warranty=use warranty.... use it as much as u can as often as u can Ghostvette likes this.

02-13-2017, 09:21 AM	#25 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 386	Drive it with VDC off. If it still does it then do what they say above. If it goes away, you're getting some wheel slip and VDC is kicking in. Lighten up on your foot and drive with a little more finesse. You can use the VDC indicator to see how far you need to lighten off. Once you get the balance worked out, turn the VDC off again and see how much further you can push it before the car comes loose. BTW, do your driving development at your own risk. Many people wreck while developing performance driving skills. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\| Last edited by B&W_Evader; 02-13-2017 at 09:26 AM.

02-13-2017, 03:27 PM	#27 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684376	Hmmmmmmm 1)Has warranty........ Use the warranty...... 2)There are other speeds that 'foot to the floor'........ 3)Road Atlanta.... get a helmet Reputable shop in the Atlanta area: Z1. You will just have to drive like a grandma to get there.... __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

02-11-2017, 04:47 PM	#22 (permalink)
jaedub Track Member Join Date: Aug 2010 Location: Los Angeles Posts: 906 Drives: 2010 Black 370Z MT Rep Power: 304	My guess is one of the sensors have gone bad. I doubt its something major. Check with your dealer since you have warranty.