01-22-2017, 07:28 PM
|
#6 (permalink)
|
|
Base Member
Join Date: Nov 2015
Location: Nebraska
Posts: 119
Drives: 11 370z M6
Rep Power: 10
|
Quote:
Originally Posted by SouthArk370Z
There may be a few wires that aren't used in the harnesses but you really have to know what you're doing before you start re-wiring things. If "bus lines" refers to the CAN bus, you need to put them back so the different modules can communicate with each other. |
I guess I need to be more clear or perhaps not look for any ideas here. I do know what I am doing mostly, I know what wire go to what I know color coding and pin number what I dont know is if the interior can needs to see the srs or not, I know the bus didnt need the radio to run as I drove it before with no issue... I know how can works I just have zero access to nissan info on what the ecu and bcm needs, I have all wiring diagrams and functions as well as pinouts... Im not new to this but they do it way differently than benz so it can be challenging to know what it needs
__________________
6M vert
|
|
|
Similar Threads
3Likes
Threaded Mode
