Idle after installing the Gen3

Trips · 12-01-2009, 10:32 PM

Quote:

Originally Posted by Knives

Yea, it definitely wasn't the most common of problems. But, no light/problem again this morning, so hopefully I'm in the clear.

I should get myself a code reader though, would probably come in handy with these situations.

Glad to Hear your Z's alright.

Knives · 12-02-2009, 09:32 AM

Quote:

Originally Posted by Triple's

Glad to Hear your Z's alright.

Thanks man. She had me worried for a second, haha.

kannibul · 12-02-2009, 03:56 PM

Quote:

Originally Posted by blackbird

I had/have the exact same issue cylinder misfire. Dealer made some adjustments but light came back on yesterday. I will have installer check all connections. I hope that that is what it is.

I bet the first thing they'll point to is the aftermarket intake if the issue shows up again.

blackbird · 12-05-2009, 12:56 PM

Just an FYI for anyone with the Stillen Gen 3. I had had 2 instances when the "service engine soon" light came on. 1st time went to dealer, they basically did a reboot and I was fine for 10 days. Got 2nd light. Both times on cooler days (cooler for New Hampshire COLD for Ca). The next day, no light. Took the car to Ballistic Motors in NH. Visual inspection and handling tubes showed no leak. The code reader said look again. The instrument said something else but I'm translating. facing the front of the car, there are two rubber hoses that connect to the intakes. Left one was solid in place. Right one was connected but lose. They removed the hose, sanded the connector a bit and replaced the hose and replaced the clamp with a screw down clamp. Rock solid 630+ RPM. Smooth. I was also advised to wait 60 seconds after starting the engine before before taking off. I had been waiting a little bit but not hat much. Will do so now. Bottom line, check the right side hose and clamp.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got around to installing my G2s	M.J.	Wheels & Tires	16	01-26-2010 10:48 PM
How much for installing?	Valentino	Engine & Drivetrain	8	09-03-2009 07:37 AM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
HELP PLEASE: Engine Idle Problem	myfirstz	Engine & Drivetrain	21	06-29-2009 05:40 PM
Only one: HFC, Gen3 Intake, or CBE?	spearfish25	Intake/Exhaust	33	06-18-2009 10:22 AM

12-05-2009, 12:56 PM	#19 (permalink)
blackbird Base Member Join Date: May 2009 Location: Nashua NH Posts: 178 Drives: 09 370Z BLk GTM TT Rep Power: 15	Just an FYI for anyone with the Stillen Gen 3. I had had 2 instances when the "service engine soon" light came on. 1st time went to dealer, they basically did a reboot and I was fine for 10 days. Got 2nd light. Both times on cooler days (cooler for New Hampshire COLD for Ca). The next day, no light. Took the car to Ballistic Motors in NH. Visual inspection and handling tubes showed no leak. The code reader said look again. The instrument said something else but I'm translating. facing the front of the car, there are two rubber hoses that connect to the intakes. Left one was solid in place. Right one was connected but lose. They removed the hose, sanded the connector a bit and replaced the hose and replaced the clamp with a screw down clamp. Rock solid 630+ RPM. Smooth. I was also advised to wait 60 seconds after starting the engine before before taking off. I had been waiting a little bit but not hat much. Will do so now. Bottom line, check the right side hose and clamp.