Clutch assembly broke; dealer says $860

nepali · 04-18-2016, 11:04 AM

Attached picture shows the part (left one) that broke off from my 11 Z's clutch assembly. Dealer says that the whole assembly has to be ordered as it comes in a single unit. Quoted price is $860. What do you guys suggest? I can still drive the car just that the helper spring won't be there. Any other complications that could arise if I drive it just the way it is right now?

Chuck33079 · 04-18-2016, 11:06 AM

Isn't that just the helper spring that we all remove anyway? Did it come off the side of the pedal?

DEpointfive0 · 04-18-2016, 11:15 AM

Quote:

Originally Posted by Chuck33079

Isn't that just the helper spring that we all remove anyway? Did it come off the side of the pedal?

Yeah, lol

A lot of people remove it or change it.

OP, you should be ok driving without it. If you rest your foot on the pedal you might have a bit more clutch wear because nothing is pushing you back.

Also... If your CSC is on its way out, not having the spring may cause it to wear a bit quicker.

Do yourself a favor, buy the RJM pedal, as well as a replacement HD CSC from ZSpeed for if and when your CSC goes out, lol

Chuck33079 · 04-18-2016, 11:19 AM

I've had mine off for 25k miles with no issues.

lj909 · 04-18-2016, 11:28 AM

Yeah man. Get the RJM clutch pedal. It's be so much nicer then the stock pedal.

Rusty · 04-18-2016, 09:19 PM

I removed that spring right after I bought my Nismo in 1/2012.

KrnAndy · 04-18-2016, 10:19 PM

860?! holy crap. how much for the part itself?

Zbrah · 04-19-2016, 03:03 AM

if I can find mine I'll sell it to you for $500. Shipped!

ARrado15 · 04-21-2016, 04:08 PM

Yea definitely get the RJM assembly if you do need a new setup. And don't have the dealer install it. It took me about 2 hours to install but that was with tuning the settings on it. It's a completely different clutch now. I have a lower engagement, and a larger friction zone. Makes driving it a dream

nepali · 04-26-2016, 04:16 PM

Thank you everyone. Will drive as it is right now and look into getting a RJM in the future.

enrique_370 · 04-28-2016, 01:31 PM

I have a full stock clutch assembly let me know if your interested I am a few hours away from you. I just bought the RJM clutch pedal though I think my master cylinder was weak cause it has gone soft since installing the RJM clutch pedal. Not sure if the dealership will warranty that since the RJM pedal is on there? What do you guys think should I put the stock back on and take it in or say try it anyways?

enrique_370 · 04-28-2016, 01:33 PM

I also have z1 poly urethane transmission mount. Car has 30k miles right now.

MagmaRed370z · 04-28-2016, 01:56 PM

Quote:

Originally Posted by Chuck33079

I've had mine off for 25k miles with no issues.

I removed mine too about a year ago. 12k no issues.

roplusbee · 04-29-2016, 11:45 AM

You don't need the helper spring assembly at all. I removed the one on my old 370 and never looked back. Feel free to spend money and purchase the RJM clutch pedal assembly if it will make you feel better, but I doubt that you really need it.

darkphantom · 04-29-2016, 06:35 PM

Quote:

Originally Posted by lj909

Yeah man. Get the RJM clutch pedal. It's be so much nicer then the stock pedal.

+1 for this, I have the RJM Pedal and LOVE it!

04-18-2016, 11:06 AM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Isn't that just the helper spring that we all remove anyway? Did it come off the side of the pedal? DEpointfive0 likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

04-18-2016, 11:19 AM	#4 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I've had mine off for 25k miles with no issues. MagmaRed370z likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

04-18-2016, 11:28 AM	#5 (permalink)
lj909 Track Member Join Date: May 2014 Location: Riverside Posts: 584 Drives: 40th 370Z Rep Power: 12	Yeah man. Get the RJM clutch pedal. It's be so much nicer then the stock pedal. YzGyz and darkphantom like this. __________________ PW 07 HR350Z R.I.P. Totaled by 82yr old woman 2010 40th Anniversary 370Z

04-18-2016, 09:19 PM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,158 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I removed that spring right after I bought my Nismo in 1/2012. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-19-2016, 03:03 AM	#8 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	if I can find mine I'll sell it to you for $500. Shipped! Z-Girl 12 likes this. __________________

04-18-2016, 10:19 PM	#7 (permalink)
KrnAndy Base Member Join Date: Feb 2016 Location: Irvine Posts: 112 Drives: 09 Nissan 370z M6 Rep Power: 9	860?! holy crap. how much for the part itself?

04-21-2016, 04:08 PM	#9 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 16	Yea definitely get the RJM assembly if you do need a new setup. And don't have the dealer install it. It took me about 2 hours to install but that was with tuning the settings on it. It's a completely different clutch now. I have a lower engagement, and a larger friction zone. Makes driving it a dream __________________ Stillen G3, Stillen CBE, Berk HFC, Eibach Springs, H&R Spacers, PW:JDM Knob, RJM Clutch Assembly, Z1 Clutch & Flywheel, Zspeed HD CSC, Stillen Oil Cooler

04-26-2016, 04:16 PM	#10 (permalink)
nepali Track Member Join Date: Apr 2011 Location: Dallas, TX Posts: 597 Drives: like a maniac! Rep Power: 15	Thank you everyone. Will drive as it is right now and look into getting a RJM in the future. __________________ '11 SR/6MT/T/S

04-28-2016, 01:31 PM	#11 (permalink)
enrique_370 Base Member Join Date: Sep 2011 Location: Texas Posts: 106 Drives: 2013-black-m6 :) Rep Power: 14	I have a full stock clutch assembly let me know if your interested I am a few hours away from you. I just bought the RJM clutch pedal though I think my master cylinder was weak cause it has gone soft since installing the RJM clutch pedal. Not sure if the dealership will warranty that since the RJM pedal is on there? What do you guys think should I put the stock back on and take it in or say try it anyways?

04-28-2016, 01:33 PM	#12 (permalink)
enrique_370 Base Member Join Date: Sep 2011 Location: Texas Posts: 106 Drives: 2013-black-m6 :) Rep Power: 14	I also have z1 poly urethane transmission mount. Car has 30k miles right now.

04-29-2016, 11:45 AM	#14 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	You don't need the helper spring assembly at all. I removed the one on my old 370 and never looked back. Feel free to spend money and purchase the RJM clutch pedal assembly if it will make you feel better, but I doubt that you really need it. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch Slave cylinder broke @ 22K	chknhawk	Engine & Drivetrain	37	07-10-2018 10:46 AM
WTB: Flywheel and clutch assembly	threeseventy	Wanted	0	03-13-2016 08:39 PM
[WTB] OEM clutch pedal assembly	pokeyl	Parts for sale (Private Classifieds)	4	10-24-2015 10:36 PM
No clutch assist assembly	jamesj1996	Engine & Drivetrain	5	01-21-2015 04:34 PM
help i broke the clutch helper spring assembly	370Zena_33	DIY Section (Do-It-Yourself)	4	04-15-2014 09:38 PM