Clutch problem after installing upgraded CSC

Originally Posted by YzGyz Me thinks the CSC is not fully disengaging when shifting. Perhaps the new CSC is larger and require more fluid volume to extend far enough to

		Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain
Clutch problem after installing upgraded CSC

3Likes

1 Post By YzGyz
2 Post By Joe@ZSpeed

LinkBack

Thread Tools

Display Modes

04-15-2016, 11:13 AM

#3 (permalink)

Joe@ZSpeed

A True Z Fanatic

Join Date: Mar 2011

Location: Ohio

Posts: 1,304

Drives: Nissan

Rep Power: 343001

Joe@ZSpeed has a reputation beyond repute

Quote:

Originally Posted by YzGyz

Me thinks the CSC is not fully disengaging when shifting. Perhaps the new CSC is larger and require more fluid volume to extend far enough to fully disengage. Mayhaps id you give the MC rod a few twist to make it longer, that will push more fluid into the CSC when the clutch pedal is depressed.

YzGyz

Our CSC is the same size as the stock unit, No adjustment is required.

Just turning the master cylinder adjustment rod a few turns is a bad idea, there is more to it than that. You must adjust the pedal height anytime master cylinder rod is adjusted for more stroke or you could cause major issues with the clutch system.

JARblue and YzGyz like this.

__________________
http://photos.zspeedperformance.com/...ardsize=468x60
Phone 937-506-7224
E-Mail Sales@Zspeed.com
www.ZSPEED.com

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Upgraded Clutch Slave Cylinder Fails Again!	pbs370z	Engine & Drivetrain	48	10-09-2015 07:50 PM
**Specialty-Z Flywheel & Clutch Kits w\ Upgraded CSC**	Seb@SZ	Drivetrain/Engine	7	03-17-2011 02:14 PM
Problem installing kenwood ddx714	david712370	Audio & Video	9	05-07-2009 04:04 PM
Slight problem after installing G3 intake!	Darkaeon	Intake/Exhaust	17	04-24-2009 01:37 PM

All times are GMT -5. The time now is 05:12 PM.