Jim Wolf Cam testing for the VQ37VHR -- Results inside!

1slow370 · 09-29-2015, 01:47 AM

Also Daelen i noticed after having to describe it in another thread but the initial write up you had on the first page you state to "re-place" the vvel components on the back of the head but it should be clarified so there is no confusion that there is a lengthy not so well described process in the fsm for aligning the control shaft to the actuator and motor, and then for aligning the sensor and actautor once back in the car that should be followed to prevent timing/vvel errors/strange running behavior once reassembled. I just wanted to throw it out there due to the number of times i've seen someone service the cams only to run into problems at startup and have to tear it all apart again to fix it. I'm sure you guys did it but it is often overlooked in the whole process.

09-29-2015, 01:47 AM	#10 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,733 Drives: v8 74 260z ;) Rep Power: 7253	Also Daelen i noticed after having to describe it in another thread but the initial write up you had on the first page you state to "re-place" the vvel components on the back of the head but it should be clarified so there is no confusion that there is a lengthy not so well described process in the fsm for aligning the control shaft to the actuator and motor, and then for aligning the sensor and actautor once back in the car that should be followed to prevent timing/vvel errors/strange running behavior once reassembled. I just wanted to throw it out there due to the number of times i've seen someone service the cams only to run into problems at startup and have to tear it all apart again to fix it. I'm sure you guys did it but it is often overlooked in the whole process. DIGItonium likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 04:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 09:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 07:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 10:37 AM