Dealer replaced transmission. Question on shifter assbly

NismoNY · 08-25-2015, 07:26 AM

Hey guys,

Dealership replaced my transmission last Thursday. They gave it back to me with a scratched up shift knob which they said they ordered and I should come back to have them put it on. They said the car drives fine though. I did some reading up and it seems like this happens a lot when replacing the shift knob due to the amount of factory loctite that's used.

I also read that the shaft or linkage can be damaged if it's removed the wrong way. My question is, IF any damage would have occurred to these items, would it have been done to the old transmission shaft or linkage? Does the new tranny come with new shaft and linkage?

Also, any way to tell if these parts are messed up? Would it be immediately noticeable upon driving? Car shifts great

Thanks!

darkphantom · 08-25-2015, 10:46 AM

Why did they replace it?

NismoNY · 08-25-2015, 12:17 PM

5th gear was grinding.

Bump, anyone?

NismoNY · 08-25-2015, 12:17 PM

5th gear was grinding.

Bump, anyone?

Rahul718 · 08-25-2015, 05:00 PM

I'd be curious to know if the linkage and shaft are included with a new tranny as well

NismoNY · 08-25-2015, 09:51 PM

I want to say they are not included. I just want to know what the margin of error is when removing the shift knob and what driving impressions would be if the linkage was messed up during the removal

08-25-2015, 07:26 AM	#1 (permalink)
NismoNY Base Member Join Date: Feb 2015 Location: NYC Posts: 112 Drives: 2014 Nismo Rep Power: 10	Dealer replaced transmission. Question on shifter assbly Hey guys, Dealership replaced my transmission last Thursday. They gave it back to me with a scratched up shift knob which they said they ordered and I should come back to have them put it on. They said the car drives fine though. I did some reading up and it seems like this happens a lot when replacing the shift knob due to the amount of factory loctite that's used. I also read that the shaft or linkage can be damaged if it's removed the wrong way. My question is, IF any damage would have occurred to these items, would it have been done to the old transmission shaft or linkage? Does the new tranny come with new shaft and linkage? Also, any way to tell if these parts are messed up? Would it be immediately noticeable upon driving? Car shifts great Thanks! Last edited by NismoNY; 08-25-2015 at 09:36 AM.

08-25-2015, 10:46 AM	#2 (permalink)
darkphantom Enthusiast Member Join Date: Apr 2015 Location: Houston, Texas Posts: 425 Drives: 13 Z34 PW M6 Rep Power: 243	Why did they replace it? __________________ '13 PW M6 \| Takeda \| ARK GRiP V2 \| H&R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What gets replaced with new transmission?	Cmike2780	Engine & Drivetrain	14	08-16-2015 09:55 PM
Think It's Okay to Buy a Used 370z That Had Transmission Replaced?	allinav	Nissan 370Z General Discussions	10	06-17-2015 11:47 AM
Question on shifter boot / headunit removal on manual transmission	ksagis	Audio & Video	2	12-14-2013 03:56 PM
transmission assembly replaced???	Sharkedd	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	97	06-26-2013 11:27 AM
Dealer transmission question	jasonbgood	Nissan 370Z General Discussions	14	07-01-2011 10:40 PM

08-25-2015, 12:17 PM	#3 (permalink)
NismoNY Base Member Join Date: Feb 2015 Location: NYC Posts: 112 Drives: 2014 Nismo Rep Power: 10	5th gear was grinding. Bump, anyone?

08-25-2015, 12:17 PM	#4 (permalink)
NismoNY Base Member Join Date: Feb 2015 Location: NYC Posts: 112 Drives: 2014 Nismo Rep Power: 10	5th gear was grinding. Bump, anyone?

08-25-2015, 05:00 PM	#5 (permalink)
Rahul718 Base Member Join Date: Nov 2013 Location: NYC Posts: 233 Drives: Nismo Z Rep Power: 11	I'd be curious to know if the linkage and shaft are included with a new tranny as well

08-25-2015, 09:51 PM	#6 (permalink)
NismoNY Base Member Join Date: Feb 2015 Location: NYC Posts: 112 Drives: 2014 Nismo Rep Power: 10	I want to say they are not included. I just want to know what the margin of error is when removing the shift knob and what driving impressions would be if the linkage was messed up during the removal