|
Yeah you will need to get the covers off and set them off the low lift stop on the control shaft. Ive never done it in the car it was
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
10-08-2015, 07:03 PM
|
#30 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,732
Drives: v8 74 260z ;)
Rep Power: 7252   |
Yeah you will need to get the covers off and set them off the low lift stop on the control shaft. Ive never done it in the car it was too much of a PITA to try and line the actuator up. I do remember that with a bit of tricky math and some feeler ga7ges you can figure out what size you need and shove it in the stop and turn the shaft to minimmum lift and that makes iit easier other wise i used a digital angle gauge (like a good digital level acurrate to .05degrees with a zero or tare button)set on the control shafts and 0'd at minnimum lift then opened 5 degrees.
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| first bump in the road, P0011 and P300 | ANMVQ | Engine & Drivetrain | 6 | 09-21-2017 06:47 PM |
| Code P0011 | ben.kathy | Nissan 370Z Owners Manual / Service Manuals | 10 | 09-20-2017 07:19 PM |
| Damn p0011, p0300,p0524 | 7speed | Engine & Drivetrain | 11 | 09-20-2017 07:18 PM |
| Blown Motor, Engine Rebuild/Replacement. | COSMO | Forced Induction | 1530 | 07-23-2016 01:08 PM |
| Help Error Code P0011 | NeverBoneStck | Engine & Drivetrain | 15 | 06-28-2015 12:57 AM |
Threaded Mode
