|
No kit needed. Put everything to TDC and then move the crank back a bit to gain slack to pull the chain off the water pump. Of coarse the tensioner
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-08-2015, 10:17 PM
|
#16 (permalink) |
|
A True Z Fanatic
Join Date: Jun 2014
Location: Ga
Posts: 14,153
Drives: 2013 Nismo 370z
Rep Power: 2684394   |
No kit needed. Put everything to TDC and then move the crank back a bit to gain slack to pull the chain off the water pump. Of coarse the tensioner will need to be locked in place and removed before you do that. The colored chain links will help you time it via the notches on the cam sprockets and crank. If you have no clue what I am talking about, get a service manual before you do anything. I can already tell by looking at the picture you are not on TDC. If you get this wrong, you are not going to be happy. Bye-Bye valves.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| first bump in the road, P0011 and P300 | ANMVQ | Engine & Drivetrain | 6 | 09-21-2017 06:47 PM |
| Code P0011 | ben.kathy | Nissan 370Z Owners Manual / Service Manuals | 10 | 09-20-2017 07:19 PM |
| Damn p0011, p0300,p0524 | 7speed | Engine & Drivetrain | 11 | 09-20-2017 07:18 PM |
| Blown Motor, Engine Rebuild/Replacement. | COSMO | Forced Induction | 1530 | 07-23-2016 01:08 PM |
| Help Error Code P0011 | NeverBoneStck | Engine & Drivetrain | 15 | 06-28-2015 12:57 AM |
Threaded Mode
