Tilton 40-527 continuous duty oil pump

DR_ · 06-15-2015, 07:08 AM

Which cooler did you use and how is it mounted? OEM VLSD?? Can you list out the fittings?

Rangerz · 06-15-2015, 12:31 PM

Quote:

Originally Posted by DR_

Which cooler did you use and how is it mounted? OEM VLSD?? Can you list out the fittings?

I will do up a little video tonight and run through what/how i did it.

Rangerz · 06-15-2015, 05:59 PM

Phone video of my set up. Sorry for rambling and the shake video. OEM VLSD...I have the Nismo GT pro 1.5 on the way. I mounted everything to a 3/16 x 12 x24 aluminium plate. You can't tell from the video but, the aluminium above the cooler is cut out for air flow. I have the fan drawing air and with the rubber stoppers I have a 1 in gap from the body to the mounting plate all around and the another .5 " on either side of the cooler core. If you route it like I did on the diff out you will need that extra NON flexible connector. It is shorter than the flexible one and allows for clearance with that bracemail point.

06-15-2015, 05:59 PM	#3 (permalink)
Rangerz Enthusiast Member Join Date: Jun 2013 Location: Northern Utah Age: 60 Posts: 476 Drives: 2012 370 Nismo Rep Power: 13	Phone video of my set up. Sorry for rambling and the shake video. OEM VLSD...I have the Nismo GT pro 1.5 on the way. I mounted everything to a 3/16 x 12 x24 aluminium plate. You can't tell from the video but, the aluminium above the cooler is cut out for air flow. I have the fan drawing air and with the rubber stoppers I have a 1 in gap from the body to the mounting plate all around and the another .5 " on either side of the cooler core. If you route it like I did on the diff out you will need that extra NON flexible connector. It is shorter than the flexible one and allows for clearance with that bracemail point. __________________ Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY Last edited by Rangerz; 06-15-2015 at 06:08 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Duty cycles	1slow370	Tuning	4	06-15-2014 10:21 PM
[FOR SALE] CZ High 5 Clutch kit Tilton CSC	levani041491	Parts for sale (Private Classifieds)	12	10-24-2013 04:56 PM
[FOR SALE] Walbro 255 Lph Fuel Pump (PUMP ONLY)	Nism0	Parts for sale (Private Classifieds)	8	08-18-2013 03:23 PM
Awarded invention in PopSci: continuous engine oil heater.	Prashiy	Engine & Drivetrain	3	06-23-2012 09:08 AM
Tilton Clutch	caj77	Engine & Drivetrain	9	03-12-2009 12:15 AM

06-15-2015, 07:08 AM	#1 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 18	Which cooler did you use and how is it mounted? OEM VLSD?? Can you list out the fittings?