Intake manifold

Schsplayer00 · 02-23-2015, 05:32 PM

Yea I compsred the 370 stock one and he bolt holes don't match up. So it's not a stock one lol. Not just have to figure out of its a 350z one. So it's still a good mod?? I just need to figure out a cover for it Becuase the stock engine cover dosent fit it.

DEpointfive0 · 02-23-2015, 05:33 PM

Quote:

Originally Posted by Schsplayer00

But the screw holes do not match up with a stock manifold

Oh...

Quote:

Originally Posted by Trilitheum

More midrange power, the M370 is essentially a modified HR manifold.

This looks like someone adapted it on their own.

I'm staring at a stock manifold right now on my bench and that isn't a stock 370 manifold, there should be 2 hose barbs on the front, and a pocket and port for the MAP sensor on the back top right side.
There should also be one more mounting tab on the front 90 degrees from the front left one.

Then yeah. HR manifold. Tril is correct.

Can you post pics of the holes? I wonder if they filled them in or said F-it

370Z JT · 02-23-2015, 05:40 PM

It should look just like the manifold on your car (Motordyne).

Schsplayer00 · 02-23-2015, 06:15 PM

If it's a 350z manifold anyone have any ideas of a cover that I can get or get made to fit it? I wonder if the fitment is the same as the m370?? If so I bet motordynes cover would still fit it.

Schsplayer00 · 02-23-2015, 06:29 PM

Quote:

Originally Posted by DEpointfive0

Oh...

Then yeah. HR manifold. Tril is correct.

Can you post pics of the holes? I wonder if they filled them in or said F-it

I don't see the old holes so im guessing they filled them in.

Joepro · 02-23-2015, 06:48 PM

page 5...you can see them side by side...also I my engine cover fit not perfectly but still was able to go on but you do not have the m370 plate so the stock cover should fit just fine. The studs i nthe back are missing, either get new ones you just use 10mm bolts(what I did)

http://motordyneusa.com/wp-content/u...ION-MANUAL.pdf

Schsplayer00 · 02-23-2015, 09:01 PM

Thanks for the input!!! I'll see if I can rig the stock one to look good if not I know I can get the Motordyne plate they told me I can order it by itself im just wondering if it will fit.. Is the Motordyne manifold and the 350z manifold the same on the exterior does anyone know??

Joepro · 02-23-2015, 09:16 PM

Th stock cover fits over this, it just bulges, so a stock cover will fit just fine on yours, just need the proper bolts quick trop to the auto parts store is all...

juld0zer · 02-25-2015, 05:24 PM

the install looks pretty neat. neater than the real M370

02-23-2015, 05:32 PM	#16 (permalink)
Schsplayer00 Base Member Join Date: Oct 2012 Location: Myrtle beach, SC Posts: 172 Drives: 09-370z-White-6speed Rep Power: 12	Yea I compsred the 370 stock one and he bolt holes don't match up. So it's not a stock one lol. Not just have to figure out of its a 350z one. So it's still a good mod?? I just need to figure out a cover for it Becuase the stock engine cover dosent fit it. __________________ 09 White/black Touring/Sport<HKS true dual exhaust burnt tips, Stillen G3 intakes, Berk test pipes, Motordyne intake manifold, Motordyne thermostat, Stillen under pulley, Uprev tune.

02-23-2015, 05:40 PM	#18 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	It should look just like the manifold on your car (Motordyne). __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

02-23-2015, 06:15 PM	#19 (permalink)
Schsplayer00 Base Member Join Date: Oct 2012 Location: Myrtle beach, SC Posts: 172 Drives: 09-370z-White-6speed Rep Power: 12	If it's a 350z manifold anyone have any ideas of a cover that I can get or get made to fit it? I wonder if the fitment is the same as the m370?? If so I bet motordynes cover would still fit it. __________________ 09 White/black Touring/Sport<HKS true dual exhaust burnt tips, Stillen G3 intakes, Berk test pipes, Motordyne intake manifold, Motordyne thermostat, Stillen under pulley, Uprev tune. Last edited by Schsplayer00; 02-23-2015 at 06:28 PM.

02-23-2015, 06:48 PM	#21 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	page 5...you can see them side by side...also I my engine cover fit not perfectly but still was able to go on but you do not have the m370 plate so the stock cover should fit just fine. The studs i nthe back are missing, either get new ones you just use 10mm bolts(what I did) http://motordyneusa.com/wp-content/u...ION-MANUAL.pdf __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 02-23-2015 at 06:52 PM.

02-23-2015, 09:01 PM	#22 (permalink)
Schsplayer00 Base Member Join Date: Oct 2012 Location: Myrtle beach, SC Posts: 172 Drives: 09-370z-White-6speed Rep Power: 12	Thanks for the input!!! I'll see if I can rig the stock one to look good if not I know I can get the Motordyne plate they told me I can order it by itself im just wondering if it will fit.. Is the Motordyne manifold and the 350z manifold the same on the exterior does anyone know?? __________________ 09 White/black Touring/Sport<HKS true dual exhaust burnt tips, Stillen G3 intakes, Berk test pipes, Motordyne intake manifold, Motordyne thermostat, Stillen under pulley, Uprev tune.

02-23-2015, 09:16 PM	#23 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Th stock cover fits over this, it just bulges, so a stock cover will fit just fine on yours, just need the proper bolts quick trop to the auto parts store is all... __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group Last edited by Joepro; 02-23-2015 at 09:20 PM.

02-25-2015, 05:24 PM	#24 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 138	the install looks pretty neat. neater than the real M370

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
z1 intake manifold	jamesj1996	Intake/Exhaust	2	10-02-2014 06:28 PM
ID this intake manifold	Japanjay	Intake/Exhaust	5	07-27-2013 07:31 PM
[FOR SALE] OEM intake manifold	seymore4	Parts for sale (Private Classifieds)	5	02-24-2012 06:17 PM
gtr intake Manifold on 370z !!	indyn	Intake/Exhaust	5	06-01-2011 09:06 AM