Limp mode randomly on start is now about everytime

Jonathonmp · 02-20-2015, 09:08 PM

It threw two codes tonight upon startup. P0101 and p010b indicating a circuit range or performance issue related to the MAF

P's_Z · 02-20-2015, 09:44 PM

Had the same code, same issues. Cleaned throttle bodies and everything is

Z does not accelerate

Jonathonmp · 02-21-2015, 07:58 AM

Quote:

Originally Posted by P's_Z

Had the same code, same issues. Cleaned throttle bodies and everything is

Z does not accelerate

excellent news that you had the exact issue to help me narrow it down haha. Did you have to do a relearn after you cleaned them or did you just bolt them back on and done?

Super Werty · 02-23-2015, 04:47 PM

Quote:

Originally Posted by Jonathonmp

the software update that was done fixed that issue on the maximas according to the tech bulletins that Nissan's techs use. It's supposed to be more forgiving in the values of things. Was yours on startups or when your driving. Mine is only on startups and never while driving and all I have come across were when people were actually driving.

Only after driving and getting oil Temps above 200. I haven't had any software updates

Sounds like your tb needs cleaning though too. Can't hurt to try

P's_Z · 02-23-2015, 06:27 PM

Quote:

Originally Posted by Jonathonmp

excellent news that you had the exact issue to help me narrow it down haha. Did you have to do a relearn after you cleaned them or did you just bolt them back on and done?

Actually the dealer did the service, and yes, they had to "recalibrate" them or whatever its called afterwards hehe

bswoll · 08-20-2015, 09:15 PM

Hey Jonathonmp,

Were you able to fix the limp mode? If you did resolved the problem, please share what you did. My Z has the same symptoms as what you described for the last couple of months. It would go into limp mode on some startups and then I would have to pull over and turn off the car and wait 30 or so seconds before turning it back on. It's freakin annoying.

MawtinZ34 · 07-17-2019, 09:40 AM

Hello I just want to share that my 370 was going through limp mode for about 6 months. How I dealt with it for so long? I was lazy and figured I just had to turn off the car and wait 10 seconds before turning it back on, to work properly again.

Finally after doing some research I cleaned my DIRTY TB and limp mode has been gone for 3 weeks now, along with the codes P010B & P102. Huge thanks for this forum that helped me, through you guys experiences solve my issues. I love my Z again thanks to you guys.

02-20-2015, 09:44 PM	#17 (permalink)
P's_Z A True Z Fanatic Join Date: Apr 2013 Location: PR Posts: 1,530 Drives: Zeta Rep Power: 469	Had the same code, same issues. Cleaned throttle bodies and everything is Z does not accelerate __________________ Zeta

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car unable to start... randomly.	Da.Menace	Nissan 370Z General Discussions	4	07-13-2013 08:56 PM
Limp Mode	Wabbyyy	Engine & Drivetrain	6	04-25-2013 11:08 PM
Did my car go into limp mode?	Fabsnoop	Engine & Drivetrain	9	01-25-2013 10:08 PM
S mode randomly cuts out	oleg	Nissan 370Z General Discussions	1	06-13-2012 06:06 PM
Possible limp mode?	DinoJ	Nissan 370Z General Discussions	21	09-04-2009 04:17 PM

02-20-2015, 09:08 PM	#16 (permalink)
Jonathonmp Base Member Join Date: Jan 2015 Location: Orlando Fl Posts: 9 Drives: 2013 370z sport Rep Power: 10	It threw two codes tonight upon startup. P0101 and p010b indicating a circuit range or performance issue related to the MAF

08-20-2015, 09:15 PM	#21 (permalink)
bswoll Base Member Join Date: Sep 2012 Location: Los Angeles Posts: 21 Drives: 2013 370Z Silver 7AT Rep Power: 12	Hey Jonathonmp, Were you able to fix the limp mode? If you did resolved the problem, please share what you did. My Z has the same symptoms as what you described for the last couple of months. It would go into limp mode on some startups and then I would have to pull over and turn off the car and wait 30 or so seconds before turning it back on. It's freakin annoying.