Yellow "Key" light after engine swap

TopgunZ · 01-26-2015, 08:44 PM

When the famous "wheel lock" issue happens can you still turn the wheel?

Nut_N_Much · 01-26-2015, 08:50 PM

Not sure, why fob is acting up. I've done swap but never unplugged everything to bump it. ECU had a heart attack. Like getting legs blown off. If reset doesn't work I dont have an answer.

No, your MAP will still be there.

No, when wheel lock happens you wont be able to turn wheel. Need to make a bypass for it. DIY has a thread for it

TopgunZ · 01-26-2015, 08:56 PM

I would and tried the reset but you need a cel light to do it and one wont show up on the dash. Also my bluetooth obd wont connect stating no ecu detected.

Nut_N_Much · 01-26-2015, 09:03 PM

Quote:

Originally Posted by TopgunZ

I would and tried the reset but you need a cel light to do it and one wont show up on the dash. Also my bluetooth obd wont connect stating no ecu detected.

Not reading ECU sounds like a ground. Man this sucks, I hate trouble shooting from a laptop. Wish i was there.

Nut_N_Much · 01-26-2015, 09:08 PM

Did you disconnect harness from motor, or pull connections from fuse box.

If you pulled from fuse box to get motor out, sounds like the clips might not be fully seated.

Sorry man, I'm on muscle relaxers and trying to focus. Excuse my typing

TopgunZ · 01-26-2015, 10:29 PM

Lol. Its all good man. I'm just glad your helping.

So my obd is definitely not working. Tried connecting osiris and it wont connect, stating no ecu detected.

Ill look closer at the ecu tomorrow and look at grounds.

imjello · 01-27-2015, 08:10 AM

Quote:

Originally Posted by TopgunZ

Lol. Its all good man. I'm just glad your helping.

So my obd is definitely not working. Tried connecting osiris and it wont connect, stating no ecu detected.

Ill look closer at the ecu tomorrow and look at grounds.

Haha, my message looks out of place with the thread merge. Good luck with your car, maybe post s vid when it's broken in.

01-26-2015, 08:44 PM	#1 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	When the famous "wheel lock" issue happens can you still turn the wheel? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-26-2015, 08:50 PM	#2 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Not sure, why fob is acting up. I've done swap but never unplugged everything to bump it. ECU had a heart attack. Like getting legs blown off. If reset doesn't work I dont have an answer. No, your MAP will still be there. No, when wheel lock happens you wont be able to turn wheel. Need to make a bypass for it. DIY has a thread for it __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

01-26-2015, 08:56 PM	#3 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	I would and tried the reset but you need a cel light to do it and one wont show up on the dash. Also my bluetooth obd wont connect stating no ecu detected. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-26-2015, 09:08 PM	#5 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Did you disconnect harness from motor, or pull connections from fuse box. If you pulled from fuse box to get motor out, sounds like the clips might not be fully seated. Sorry man, I'm on muscle relaxers and trying to focus. Excuse my typing __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

01-26-2015, 10:29 PM	#6 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Lol. Its all good man. I'm just glad your helping. So my obd is definitely not working. Tried connecting osiris and it wont connect, stating no ecu detected. Ill look closer at the ecu tomorrow and look at grounds. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Service engine soon" light	import111	Engine & Drivetrain	71	06-28-2016 11:57 PM
"Limp Mode" & service engine light	BangZ	Engine & Drivetrain	6	01-14-2015 08:43 PM
2013 370z "SERVICE ENGINE SOON" light on	OEYBONJOVI	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	12	08-19-2013 05:47 PM
Help! Blown fuses and "Service Engine Soon" light	Kdberan	Exterior & Interior	2	11-29-2012 11:33 AM
Just got "Service Engine Soon" light..	dcrew1x	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	9	02-15-2012 06:38 PM