RJM Clutch Pedal System for 370Z - Fully Customizable Clutch Feel & Stroke

Mr&Mrs · 11-27-2012, 11:11 AM

Im confused now LOL maybe I understood things wrong. I thought all we were doing with this pedal is changing where the pedal itself causes the engagment/disengagement (but it stays the same). We can make it high in the pedal stroke (like stock) or low. Kind of like a short throw shifter. They dont change the gear distance itself just the distance it takes the shifter to do it by changing the axis.

Quote:

Originally Posted by gotchu99

The stock setting according to the instructions is the adjuster knob clockwise all the way until it stops. It says that this is 0% and is needed to get the full master cylinder stroke to bleed the lines if you ever had too. But on install you turn the knob counter clockwise all the way and then give it three turns to the right (clockwise) and thats 70%. Thats what it says to set it at for install. I believe as long as the clutch is at or higher then your brake pedal you should get full engagement and disengagement. If the clutch pedal is sitting lower then the brake pedal then turn the clutch Rod at the fork to adjust it to proper height. Mine was above the pedal without needing to tweak the clutch Rod at the fork. I'm sure Ryan can chime and and explain it better.

Stino · 08-27-2013, 09:00 PM

One of the best mods I've done to date. (period)

Ryan @ RJM · 08-27-2013, 09:33 PM

Quote:

Originally Posted by Stino

One of the best mods I've done to date. (period)

Stino, glad to hear your enjoying the pedal

It always makes my day hearing my humble pedal assembly is helping raise a customers enjoyment of their vehicle

08-27-2013, 09:00 PM	#2 (permalink)
Stino Base Member Join Date: Apr 2011 Location: Florida Posts: 159 Drives: 2010 370Z Sport Rep Power: 16	One of the best mods I've done to date. (period) Mr&Mrs likes this. __________________ 10 370Z Sport\|Berk CBE & HFC\|NISMO R-TUNE CAI\|Z1 Oil & PS Coolers\|Mishimoto Radiator\|UpRev\|Nismo S-Tune\|SEIBON Spoiler\|Eibach Sways, Springs, Spacers\|SPC Camber\|RJM Clutch Pedal\|Enkei Wheels\|StopTech Rotors & Pads\|SS Brake/Clutch Lines\|Alpine W900BT, PDX5, Rear Camera, Boston SR60, S35 & 10" G3 Sub\|3M Ceramic Tint

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch pedal too soft/no feel? Remove the helper spring!	esfourteen	Engine & Drivetrain	560	12-31-2020 12:17 PM
Review: RJM AFP Clutch Pedal System	modme	Engine & Drivetrain	217	05-18-2020 07:59 AM
Clutch pedal feel	Zboy	Engine & Drivetrain	2	08-27-2012 08:43 PM
Review: 370z RJM AFP Clutch Pedal System	cdoxp800	Engine & Drivetrain	0	08-12-2012 11:57 AM