Ryan, is it possible to upgrade a version 1 pedal to version 2?

Galeforce, sorry I missed seeing this post yesterday. It is 100% possible but would be costly as the R2 uses a revamped 2pc pedal arm to allow for the additional adjustment point. Everything else remained unchanged so the new arm design drops right into the existing brackets. The pedal arm is about 60% of the assembly cost and the most labour intensive piece to produce. Since you're in Ontario best I could do is $125 shipped for a new R2 arm assembly for you. However I'm not sure it'd be worth the cost just for the extra adjusting range.

I'm a little bummed out I must have gotten one of the last Ver 1 right before the V2s became available but such is the tempo of improvement I suppose. Mine is still new in the box and I'm wondering how much better V2 is and if I should go through the work of installing my current one. Do you have pictures of the V2 and would it be worth tossing my V1 for it?

MX52Z, actually you purchased more than a full 2 months before the change over to the revised pedal arm the first week of March. Unfortunately small improvements are made along the way as new things are discovered and small details are addressed.
I 100% would not hesitate to install your rev1 pedal assembly as the R2 change is extremely minor in the grand scheme of things and 95% of all the reviews posted here in this thread and in the drivetrain review thread are from happy Rev1 customers. The addional adjustment range offered by the newer design only affects a very small percentage of customers who actually need or wanted additional range for more exotic clutch setups. Otherwise the R2 adjustment point is simply a more convienient place to make small pedal height changes without needing to touch the clutch rod adjustment.
While I don't have a photo handy I did see a photo in SPOHN's journal/build page showing the new arm. To put it in the most basic terms I simply cut the rev 1 arm in half and put it back together with 3 bolts to allow the two halves to pivot in the middle. The upper arm adjuster assembly and the lower pedal pad section remained completely unchanged. Maybe I should have called it the R1.1 instead.

Still 2 Units available this weekend.

Everyone,

I’m currently just awaiting receipt of laser cut parts from my supplier to begin fabrication of another 20 Pedal assemblies. After speaking with them yesterday I’m expected to have parts in hand either Tuesday or Weds next week and I’d plan to have your pedal assemblies start shipping out again by next Friday

The RJM Webstore is currently open and accepting Pre-Orders towards this next batch of Rev2's. I'm expecting orders to start picking up next week after ZDayZ so as always pre-order sales will be shipped asap prior to regular stock being posted. If you'r looking to pick one in the next week or two before they sell out again here's your chance.

Have a great weekend and hope everyone attending ZDayZ is having an epic time in Fontana!!!:happydance: Bryan, Graham & the rest of the ZDayZ crew put on an amazing event.

Ryan Morgan
RJM Performance Inc.

370Z Rev 2 AFP Pedal Assemblies are back in stock and ready to ship this weekend! Visit our webstore to purchase yours and to get more details:driving:

17 Units Left Available as of this evening.

I installed the RJM Performance Adjustable Clutch Pedal Assembly today. This has now become my favorite mod. I was never fond of the stock clutch feel and swapping it out for the RJM unit makes a world of difference. The clutch catches much lower now and is much smoother. Shifts are now the way they should be. The install was a pain for me since it's a tight squeeze and I'm kind of a big guy. I'm also left handed which didn't help. I highly recommend this product to anyone with a 6MT.

pedZ, Very happy to hear you're enjoying your new favorite mod:tup: I can simpathise with the difficulty of working under the dash as a big guy. I'm 5'11 260lbs and have done about 100 installs now between product testing the various designs and different vehicles. Some good stretching helps before crawling under the dash but after you do..... :driving:

Down to just 2 Units left Today. Will have more coming in by mid-next week.
Thanks

Yeah, the new pedal is well worth the install difficulty. It makes moving between gears so much better on the Z. Love it! Thanks for making such a great quality product Ryan. :tup:

You're Very welcome:tiphat:

Are these still available for a 2012 Nismo?

Yes, for all 2009 to 2014 370Z's including Nismo's. The last 2 I had in stock sold yesterday shortly after my post. I'll have parts for another 20 coming in next Tuesday and the webstore is open for orders towards this next batch.

Thanks,
Ryan@ RJM

pedZ, I'm not a big guy and I had a hard time getting under there, I can imagine the difficulty for a big guy.

It took me quite a bit longer than the 2 hours said to install and I had all the tools necessary at hand, but it was worth the effort. My shifts are quicker due to lower engagement point/shorter clutch travel, not to mention easier, smoother shifts. I had already installed the clutch helper spring 8 months ago which helped, but this brings it to a whole different level.

Ryan, Mahalo for a great mod!

:tup: Definitely worth it!

I've got one of these new in the box I bought and never installed and got rid of the z pm me if anyone wants it

I PM'd you the other day. How much will you let it go for? Also, how old is it?

After a few weeks of being out of stock I've finally got Qty20 of the 370Z V2 AFP Assemblies back in stock and ready to go again just in time for the weekend.
Grab one while you can as they always sell out fast!:driving:

Installed mine wed night... Wow what a difference over the factory petal! My twin disc was such a pain to drive, this made my Z so much more fun to drive!!! Great product thanks Ryan!

I bought a Rev 1 in March, and thought I'd chime in to say after 5 months I still delighted I did this. Clutch feel and release point feels completely natural and this was an immediate fix to the most aggravating thing about this car. I also have a friend who just installed the 350Z kit and he is equally happy. Finally, it so apparent that Ryan is one of the most committed guys to great customer service you'll find. For anyone that's on the fence (I can't imagine why at this point), just do it!

futurez and ltullos you're both very welcome:tup: Thank you for taking the time to post your reviews on the product and service. I'm very happy to hear your enjoying the product:driving:

Itullos, thanks for the props on the customers service as it's always great to see my hard work and effort appreciated :tiphat: I'm currently pulling 80hr work weeks working full time as a Mechanical Engineer, running RJM Performance and raising a young family with my wife and 3 kids so it's tough to keep ahead of everything some days but I always strive for the best customer service and support I can provide.

Thanks Guys!

New Updates - Unofficially Rev 2.1 now
 

Down to just 4 Units left available out of 20 last weekend. Better hurry before they sell out again.

As well the units in stock have received a few more unofficial updates (Rev 2.1 if you will :) )
- The center sliding assembly can now move further up to allow more clear access to install the master cylinder nuts.
- Secondly the upper switch mount is now adjustable as well to allow the switch to be better centered up on the rubber stopper over a wider range of pedal heights.

These updates have been applied to all units that shipped since the arrival of the new stock last weekend.
:tup:

How much is this thing shipped to 38002?

$249.99 for the 370Z V2 Pedal Assembly + $15 Flat Rate S&H from Canada to anywhere in the USA.

Placed my order!

One of the best mods I've done to date. (period)

dragonbreath Thank you, order received:tup: Email sent.

Down to just 3 Units left available for the long weekend.

Stino, glad to hear your enjoying the pedal:happydance: It always makes my day hearing my humble pedal assembly is helping raise a customers enjoyment of their vehicle:driving:

buy it you won't reget it.!!!!


I just drove mine this morning with a stage 3 clutch feels like stock.

Thanks Ryan :hello:

Hopefully Ill be installing mine this weekend. I have been busy these past two weeks. Ill post a review when I get some time with it.

Wow you guys are crazy to not jump on this deal. If you have been waiting now is the time! :driving:

I would just like to say, "poo". I just saw the sale from last weekend.

The response last weekend to the sale was amazing and sold out very quickly:driving:

I shoud have pedal units back in stock by Oct 23rd.

Comfirmed parts to build the next batch of pedal assemblies will be coming in on the 23rd. Orders will start shipping Thursday or Friday as these new units get fabricated, painted and assembled for everyone. Order early to get ahead of the rush.