Nissan 370Z Forum
Page 17 of 41 « First 71516 17 181927 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Drivetrain/Engine (http://www.the370z.com/drivetrain-engine/)
-   -   RJM Clutch Pedal System for 370Z - Fully Customizable Clutch Feel & Stroke (http://www.the370z.com/drivetrain-engine/62129-rjm-clutch-pedal-system-370z-fully-customizable-clutch-feel-stroke.html)

JARblue 05-21-2014 06:37 AM
Quote:
Originally Posted by Ryan @ RJM (Post 2827109)
JARblue, you can independently move the height of the lower arm section up/down up to 3/4" by loosening the 3 bolt connection between the upper/lower arms allowing the arm to be "clocked" to a new angle and then tighten it back up again. Although the adjustment you mentioned above with the 2 bearing pre-load bolts is specifically just for aligning the clutch rod for a straight push of the linkage and not intended for height adjustment beyond leveling the rod.
Hope that helps a bit but I suspect what you're trying to do is raise the entire assembly more on the firewall which can't be done.
Gotcha, Ryan. Thanks! I will take a look at it again when I'm working on the car this weekend :tup:

onzedge 05-21-2014 07:19 AM
Quote:
Originally Posted by Ryan @ RJM (Post 2827109)
JARblue, you can independently move the height of the lower arm section up/down up to 3/4" by loosening the 3 bolt connection between the upper/lower arms allowing the arm to be "clocked" to a new angle and then tighten it back up again. Although the adjustment you mentioned above with the 2 bearing pre-load bolts is specifically just for aligning the clutch rod for a straight push of the linkage and not intended for height adjustment beyond leveling the rod.
Hope that helps a bit but I suspect what you're trying to do is raise the entire assembly more on the firewall which can't be done.
:tup:

Ryan @ RJM 05-21-2014 07:00 PM
Quote:
Originally Posted by madwi (Post 2827447)
Not hard to describe at all... ******* awesome! :icon17:

Ryan, I do not think I can add anything that has not been said already by others. All vendors should take note of how you operate. Great communication all the way through the whole transaction and a solid product. :tup:

P.S. Now that I bought mine, you really should be charging more :rofl2:
Lol, it's reading post like yours that really makes my day and keeps me pushing hard on all those late nights in the shop :tup: I'm very happy to hear your enjoying your new pedal:driving:
Honestly RJM has never been about the profits. As long as I'm helping others in the community better enjoy their rides and I make a few bucks at the end for my kids college funds it's all good:tup:

140BPM 05-23-2014 02:08 PM
I already posted the following question in another 'review' thread, but thought I'd post here just in case in the more 'official' thread...

Will this upgrade have any effect on the clutch pedal tapping sensation I'm experiencing? See my other post Here for links to other threads on this forum discussing the clicking sensation I'm talking about...

Ryan @ RJM 06-06-2014 08:38 AM
Finally Back In Stock!
 
For everyone that's been waiting all back orders have been fabricated and shipped out as of yesterday!
It was a long and troubled wait to getting parts cut by my laser cutting supplier this time around but I've now got 40 units Available this Weekend:driving:

onzedge 06-06-2014 08:39 AM
Quote:
Originally Posted by Ryan @ RJM (Post 2848868)
For everyone that's been waiting all back orders have been fabricated and shipped out as of yesterday!
It was a long and troubled wait to getting parts cut by my laser cutting supplier this time around but I've now got 40 units Available this Weekend:driving:
:tup:

Ryan @ RJM 06-14-2014 07:26 AM
Weekend Bump
 
Down to just 24 left available this weekend out of the 50 that just came in last week! These will be sold out again QUICK! :driving:

kjz 06-16-2014 11:23 AM
Z owners... this should be your first and best mod for ur Z.
Installed it 3 months ago and still runs perfectly!!!

Trust me. I want to share good products with other Z owners as well..

Thanks again, Ryan!!

140BPM 06-17-2014 12:01 AM
Quote:
Originally Posted by Ryan @ RJM (Post 2858984)
Down to just 24 left available this weekend out of the 50 that just came in last week!
Make that 23 ;) :excited:

Ryan @ RJM 06-17-2014 11:28 AM
Quote:
Originally Posted by kjz (Post 2860931)
Z owners... this should be your first and best mod for ur Z.
Installed it 3 months ago and still runs perfectly!!!

Trust me. I want to share good products with other Z owners as well..

Thanks again, Ryan!!
KJZ, You're very welcome and thanks for the props:tup:

Ryan @ RJM 06-17-2014 11:29 AM
Quote:
Originally Posted by 140BPM (Post 2861815)
Make that 23 ;) :excited:
140BPM Thank you, Order Received:tup: You'll be receiving a formal email later today about your shipment.

Thanks,
Ryan@RJM

BA9092 06-27-2014 12:14 AM
2 Attachment(s)
Finally had a full day off to install the RJM clutch pedal.

Wow! MUCH better modulation and engagement now! It's PERFECT! Feels like the world-famous Honda/Acura clutch feel I had on my old Accord V6, S2000, Prelude and RSX!

The instructions and construction are amazing! Took me just under 4 hours since I took my time and breaks - it was a hot and humid day here in Dallas. No problems though and everything fit perfectly.

Thank you again, Ryan! :driving:

Ryan @ RJM 06-29-2014 08:13 PM
Quote:
Originally Posted by BA9092 (Post 2876222)
Finally had a full day off to install the RJM clutch pedal.

Wow! MUCH better modulation and engagement now! It's PERFECT! Feels like the world-famous Honda/Acura clutch feel I had on my old Accord V6, S2000, Prelude and RSX!

The instructions and construction are amazing! Took me just under 4 hours since I took my time and breaks - it was a hot and humid day here in Dallas. No problems though and everything fit perfectly.

Thank you again, Ryan! :driving:
BA9092 You're Very Welcome! I'm glad to hear you had a good install and are enjoying the new pedal assembly:tup:

Ryan @ RJM 07-01-2014 09:23 AM
Hey Guy's,
This week I'm offering up a local install deal for anyone in Soutwestern Ontario who's interested in picking up an RJM Pedal at a smoking deal with installation included. 370Z/G37 Rev2.1 AFP Clutch Pedal Assembly installed + tuning for just $325 CAD all-in with HST included:icon21:

Current Canadian web price for just the pedal unit is $245+ $10 shipping + HST = $288.15 for Ontario residents so you'd be getting installation and tuning for only $36 bucks!

Installation is at our new location just 5mins South of St.Thomas Ont.
I've currently got the week off from my day job and can schedule installs anytime morning, afternoon or evening from Today thru Monday July 7th.

Please PM or email to make an appointment:thumbup:

Thanks Ryan@RJM

theBroodwich 07-09-2014 12:58 AM
Just ordered, looking forward to smoother launches and upshifts!


All times are GMT -5. The time now is 02:33 PM.
Page 17 of 41 « First 71516 17 181927 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2